Question about Belkin (F5D7231UK4) Wireless Router
I plugged in my Belkin ADSL Modem with Wireless G Router, 54 mbps, 802.11g, and followed the steps to the letter, removing my old dial-up modem and connecting Belkin. The last step requires me to connect to the internet and register the product, but whenever I open internet explorer, the dial-up connection window pops up, but won't connect, seeing as the old modem is no longer connected. The Belkin Router has also been added as a LAN connection, but I have no idea if this means something, or even how to connect using the LAN connection
Try this, assuming you're using Internet Explorer: Go to Tools > Internet Options and select the Connections tab. Does it show your old dial-up connection in the list? If so highlight it and click on REMOVE. Close IE and re-open it. It should now use the Belkin LAN connection.
Posted on Aug 18, 2007
You need to remove the Dial-up connection, assuming you aren't going to use it anymore. To do this, open control panel and then go to internet options. Click the connections tab. Select your dial-up connection and click remove. Then click Setup at the top to setup your new internet connection. This will open the New Connection Wizard. Select "Connect to the internet", click next, "Set up my connection manually", next, "Connect using a broadband cnection that is always on", next, finish. Your internet should work now. If it dosen't, call your ISP.
Posted on Aug 18, 2007
Tips for a great answer:
Dec 16, 2009 | Belkin (F5D8231-4) Wireless Router...
Oct 17, 2009 | 2wire Wireless-G 802.11g ADSL Gateway
Oct 04, 2009 | Computers & Internet
Sep 26, 2009 | Belkin F5D7234-4 Router
Sep 15, 2008 | Belkin (F5D7633UK4A) Wireless Router
Jul 11, 2008 | Linksys Wireless-G Broadband Router
This issue usally occurs when the router is able to save the data stored or in other words the Router id not able to AUTHENTICATE, but as you already got a new router and you have already done the fireware upgradation of the router. we can also upgrade the firmware of your speedstream modem.
plz do these following steps ,( plz disconect the router from the computer and modem completly while doing the steps )
The Efficient 5260 modems that can be upgraded are as follows:
Look on the label on the bottom of your modem. It should read:
SpeedStream 5260 Ethernet ADSL Modem
Part Number: 060-5660-00x (where x=any number)
Revision: any (all revisions seem to work)
If your part number reads anything else, your modem is most likely not upgradable.
For those curious, 5660 models 003 and earlier do NOT support G.Lite ADSL, only DMT. If you are buying a 5260 or 5660 model secondhand, and your DSL ISP uses G.Lite DSL, it would be a good idea to check with the person selling you the DSL modem.
UPDATE: As of 5660 Firmware v2.3.0(2) and later all 5660 including 5260/5660 hybrids support G.Lite ADSL. It pays to use the latest Firmware.
PLZ REPLY IF THIS HELPS, I WILL TRY TO FIND OUT THE RESOLUTION FOR THIS ISSUE
Oct 18, 2007 | Belkin (F5D8231-4) Wireless Router...
2,304 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: