Projection display blinking
YES! I also have the same issue - I ASSUMED that it was the RED LASER BLINKING behind the PROJECTED time (on the wall/ceiling), but a different brand with a similar problem was described as actually a PROJECTED RED LED, NOT A LASER. In either case, still not sure what the problem is. ;(
To RESTATE the ISSUE for NEW READERS: These digital alarm clocks (with AutoSet through radio signals) project the time in red color on the wall or ceiling. HOWEVER, after some time, the PROJECTED RED TIME begins to flash or blink INTERMITTENTLY - this is NOT a setting issue. The flashing/blinking projection is totally intermittent, occurring every 0.5 to 6 seconds, randomly, leading me to believe it COULD be broken/cracked soldering contact points (which presumably could be fixed by resoldering those contact points on the circuit board), OR perhaps some issue with the internal chip (which would NOT be fixable by a DIYer, I would assume). ANY THOUGHTS?? Thanks!
The issue I am talking about is that my red / green / blue lamps do not line up and on bright images, the screen tries to shrink in. Also, in the middle of all the edges, the picture is curved inward.
When you say convergence ic's are you talking about the PCB 483520988561? Thanks.
×