Hoover S3639 WindTunnel Bagged Canister Vacuum Logo

Question about Hoover S3639 WindTunnel Bagged Canister Vacuum

1 Answer

MY CLEANER CUTS OFF

LATELY MY UPRIGHT WINDTUNNEL HAS BEEN CUTTING OFF. AT FIRST IT WOULD CUT OFF, I WOULD TURN OFF THE SWITCH WAIT FOR A FEW MINUTES TURN IT BACK ON AND IT WOULD WORK UNTIL I WAS DONE,NOW IT RUNS FOR ABOUT 10 MINUTES AND CUTS OFF AGAIN CAN YOU HELP?

Posted by WALDO2 on

  • Anonymous Feb 23, 2008

    I turn off the vacuum cleaner and wait.

×

Ad

1 Answer

Anonymous

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

My Hoover S3639 on/off switch stopped working. I don't hear the 'click' any more. I removed the top of the vacuum but can't determine how to replace the switch.

Posted on Jul 13, 2008

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Reset switch


There is no reset button it as a Thermal Cut Off



This vacuum cleaner has a special thermostat that protects the cleaner in case of motor overheating. If the cleaner suddenly

shuts off, turn the switch off and unplug the cleaner.

Check the cleaner for a possible source of overheating such as a blocked hose or clogged filters. If these conditions are found, fix

them and wait at least 30 minutes before attempting to use the cleaner. After the 30-minute period, plug the cleaner back in and

turn on the switch. If the cleaner still does not run, then call 1-800-282-2886 for customer assistance
this link below is the manual
http://dl.owneriq.net/b/b7517422-db37-404e-9da2-d898185942e5.pdf
3helpful
2answers

Why does my vacuum cleaner quite working about two minutes into vacuuming? It just shuts off. I have the pet fur picker upper version

Sounds like overheating of motor operating a thermal cut out ..Clean all filters you can run machine with no filters fitted to try if okay first.....
1helpful
1answer

Why doe my hoover mach3 stop during operation? I have to wait until the moter cools down.Then i turn on the switch normal way.Then a few minutes latter it stops again.

Your Hoover is stopping because it is overheating. This is a sure sign that there is a blockage somewhere. Find the blockage and clear it, and that should solve the problem.
1helpful
1answer

Hoove Cyclonic Bagless vacuum shuts off after only a few minutes

The motor has a protective overload cutout device to stop it from over heating - this can be caused by a blockage of some sort in the hose or brushroll compartment or blocked filters.
After checking the above and it still cuts out, take it back under gurantee
2helpful
1answer

Stops after a few minutes

Its overheating, so the TOC (thermal overload cutout device) is cutting the power to the motor to protect it.
Thats why it works when it has cooled down.
Check for blockages and make sure the filters are clean, if it still happens take to an approved engineer to check the TOC
0helpful
1answer

Why does the hose have no suction?

Hi,
Sounds like your machine has a blockage in the vacuum system, and is cutting out from overheating. If you no longer have a manual, which will tell you about clearing blockages, you can download from the Hoover website.
Good luck!
0helpful
1answer

Windtunnel ultra U6425-900 stops running after 5 minutes

Sounds like its overheating and cutting out.
This is normally caused by a blockage or blocked filers.

Please leave feedback
Thanks
Rob
0helpful
1answer

Dyson

the automatic cut out switch on the motor needs replacing when the motor gets hot this switch comes in and stops the motor from overheating when the motor cools down the cleaner will work again and cut out again when the motor gets hot if it is not replaced it will eventually burn the motor out after the switch has been replaced both the filter and cyclone need to be cleaned on a regular basis or the same will happen again
0helpful
1answer

MY CLEANER CUTS OFF

Check that the bag is not full, check that is not a broken contact in one of the wires.
0helpful
1answer

CUTTING OFF

Ok What is probably causing the problem is an internal error inside the vacuum. What I recomend you to do is take it back where you bought it and tell them what ever is wrong with it.

PLEASE RATE MY ANSWER AS SOON AS POSSIBLE!


Hope it works! Tell me if you have any questions later on!
Not finding what you are looking for?

341 views

Ask a Question

Usually answered in minutes!

Top Hoover Vacuums Experts

Brad Brown

Level 3 Expert

19008 Answers

Mike

Level 3 Expert

4382 Answers

Thatvacguy.com

Level 3 Expert

1619 Answers

Are you a Hoover Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...