Fossil CH2331 Wrist Watch Logo
Posted on Aug 18, 2007

Band adjustment How do you adjust the band to make smaller on this watch

  • 5 more comments 
  • Anonymous Dec 07, 2007

    adjust band

  • Anonymous Dec 25, 2007

    the band is way too large

  • Anonymous Jan 01, 2008

    i have a stainless, clasp type watch band. removable links are

    indicated by arrows. i don't know how to remove these links.

  • Anonymous Jan 07, 2008

    I have the same problem. stainless stell bank, with arrows but do not know how to remove. was able to get the main pintn out but can't figure out how to get the others out, links removed and pin put back in.

  • JimBob13 Feb 09, 2008

    Have a tourneau with a stainless steel band that says watch gear. I can not figure out how to remove the links to tighten the band.

    The bottom links have arrows but that is not too helpful. I have taken out the pin that connects with the clasp, but now am stuck.

  • Saspag Mar 02, 2008

    Cannot remove links from Armitron watch

  • Intersol Mar 20, 2008

    Getting the split pin out.



    I tried the push pin solution and it worked like a charm. I did however first blunt the point of the push pin by scraping it across a rough surface.

×

4 Answers

Anonymous

Level 1:

An expert who has achieved level 1.

  • Contributor 1 Answer
  • Posted on Mar 18, 2008
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

Joined: Mar 18, 2008
Answers
1
Questions
0
Helped
827
Points
2

I was able to take use a push pin (thumb tack) to get out the (split) pin. I put the thumb tack in the hole of the pin I wanted to remove, place the thumb tack upside down on our counter top and gently but firmly push the pin out. It only has to push out an 1/8 of an inch and then you can pull it the rest of the way. Thanks to the diagram that "guest" posted above - I copied and pasted: http://www.pmwf.com/Watches/WatchSchool/WS%2014%20How%20to%20Resize%20Common%20Bracelets/WS%2014%20How%20to%20Resize%20Bracelets.htm#Split%20pin%20bracelets in the browser and it showed me how the pins work in the wrist band. Didn't need all of the fancy tools. (:

procuffs

Level 1:

An expert who has achieved level 1.

MVP:

An expert that got 5 achievements.

Habit-Forming:

Visited the website for 3 consecutive days.

New Friend:

An expert that has 1 follower.

  • Contributor 55 Answers
  • Posted on Dec 20, 2013
procuffs
Contributor
Level 1:

An expert who has achieved level 1.

MVP:

An expert that got 5 achievements.

Habit-Forming:

Visited the website for 3 consecutive days.

New Friend:

An expert that has 1 follower.

Joined: Nov 11, 2013
Answers
55
Questions
0
Helped
49111
Points
60

I agree with gordyadams. Information shared by him is authentic and useful. You can also visit usb cufflinks. Here you will get a detail information about it.

Ad
A

Anonymous

Http://www.pmwf.com/Watches/WatchSchool/WS%2014%20How%20to%20Resize%20Common%20Bracelets/WS%2014%20How%20to%20Resize%20Bracelets.htm#Split%20pin%20bracelets

A

Anonymous

Http://www.pmwf.com/Watches/WatchSchool/WS%2014%20How%20to%20Resize%20Common%20Bracelets/WS%2014%20How%20to%20Resize%20Bracelets.htm#Split%20pin%20bracelets

2 Related Answers

Anonymous

  • 1 Answer
  • Posted on Dec 25, 2008

SOURCE: fossil watch band adjustment

throw the ******* thing away

Ad

Anonymous

  • 1 Answer
  • Posted on Apr 30, 2009

SOURCE: wrist band adjustment on a fossil watch

Just take a tiny little jewelery screw driver small enough to fit in the pin hole and tap it with anything that you can find. Then pull out other end. Look for arrows indicating which way to remove pin and go in that direction Some pins are like a hairpin and have a split at one end. Replace solid end first opposite of arrow direction. If there are arrows in both directions on the same link; like Fossil for instance, that means that it doesn't matter which direction the pins are removed or replaced. They are solid and they can go back either end first. It's easy. To get the pin in all the way I just used the little screw driver and tapped it in. Good luck.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

How to make my Casio watch band smaller ?

To adjust the dual time on your Tommy Hilfiger watch model 1791709, follow these steps:
  1. Press the "Mode" button to enter the dual time mode. The dual time mode is indicated by the small "D" at the top of the display.
  2. Hold down the "Adjust" button for a few seconds until the hours digit starts flashing.
  3. Press the "Adjust" button repeatedly to adjust the hours of the second time zone.
  4. Press the "Mode" button to move to the minutes digit, which will start flashing.
  5. Press the "Adjust" button repeatedly to adjust the minutes of the second time zone.
0helpful
1answer

How do I make the watch band smaller?

to adjust the size of your wrist...eat chocolate!
most watches with linked wristbands require the links removing.(small pins to b e pushed out) the type with the chain links usually have a clamp to release to slide the clasp up the band. the instructions should be with the watch manual. or ask a jeweler to help.

please post pictures if need more help so i can see the design
1helpful
1answer

Can the band on my Ed Hardy watch be adjusted? It is much too large. Do you think a jeweler can make the band smaller? There is some kind of clip on the underside of the watch band.

yes, it can be adjusted. just bring it to watch expert and surely they know what to do. any watch are made are adjustable to fit in customer's wrists.
Jul 18, 2011 • Watches
0helpful
1answer

Other than removing links, can I make smaller adjustments to the band on my Omega seamster limited edition?

mcdevito75 here, You should right at the clasp, simply remove the pin and move the entire band up thru the other adjustment holes you see along side the clasp itself. If there aren"t any additional holes along side of the clasp for the band to move up closer to the clasp lock, then no other adjustments can be made.
1helpful
1answer

Adjusting the watch band

Without knowing the type of band you have, I can only say that the links in an expand band can be removed to make it smaller. Now adding more links would require that one would need obtain compatible links.
Nov 21, 2009 • Watches
1helpful
2answers

How to make a relic watch bracelet a little smaller?

No but if this is a mens watch there might be a micro adjustment on the clasp. To adjust press the pin in the clasp and move the pin in or out depending on the position of the pin to make loose or tight.
12helpful
3answers

How do I adjust my timex wr 30m watch stretch band?

It's very difficult. You have to take the decorative link covering off first, then continue with the actual stretch band by following these directions.

http://www.watchmaterial.com/How_to_size_a_watch_band.asp
Feb 13, 2008 • Watches
1helpful
3answers

Aquaswiss Trax watch band adjustment

VSNDESIGNS SAYS:

You should first try to adjust the band at the Clasp first. The clasp has three holes that you could easily move your band up or down into. If you need to remove one or more of the links, try the following.

http://www.fixya.com/support/t315141-adjust_band_aquaswiss_trax_watch


http://www.rgmarchitect.com
Feb 09, 2008 • Watches
0helpful
2answers
Not finding what you are looking for?

837 views

Ask a Question

Usually answered in minutes!

Top Fossil Watches Experts

john h

Level 3 Expert

29490 Answers

Ngoro

Level 3 Expert

3521 Answers

NOEL
NOEL

Level 3 Expert

8606 Answers

Are you a Fossil Watch Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...