- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
J1 is the toner cartridge. Needs to be replaced, printer will not print with a cartridge that is empty.
You can try resetting the Workcentre. Power on, hit "C" then the far left button back and forth 4 times, then enter 14 (like you were going to make 14 copies) hit print. Should clear the code. But if the cartridge is empty the code will return,
Make sure you have the right code: J1 or J2.
one is for the drum and the other is for the ink.
Make sure the toner unit is for this model and not for a different model.
If the old modual is still available, check the connectors at the back and see if they are the same.
If anything else Call Xerox for repair. If the cartridge was bought through Xerox have your reciete available for warrenty.
If repairs still need to be made, A Xerox service call may be needed in order to fully repair the copier and warrenty the cartridge.
that is the message for low or out of toner. What you are doing by tapping it is just lostening the reemaining ink in the cartridge. If the cartridge is new, have it replaced where ever you purchased it because most likely its defective.
There is a gear on the end of the fuse that is bad.
Google a business called The Parts Drop.
You can order that part there, less then $20 from them. No I do not work for them LOL, But deal with them often.
If you need instructions on how to replace that gear let me know.
It's not difficult to replace. And that is the problem. Guarantee it 100 percent.
J1 is a different issue. J1 means your out of toner.
Low Fuser Temperature.
Probably a blown heat lamp
try reseting the H code
Press CLEAR, EXPOSURE MODE, CLEAR, EXPOSURE MODE. The display should go blank. Then enter 14 with the copy count keys and press START. If the machine does not turn off and back on by itself - then turn it Off and back on. See if the H code comes back.