We just reinstalled it and it wont stop beeping
I have helped over 1100 folks with a similar problem. The fix is simple and free. Please go to my web site at the following link: http://fp1.centurytel.net/Powerman/Dreaded F7 Problem.pdf Let me know if it works. You can email me at: [email protected]
Posted on Aug 20, 2007
Hi
F1 Error indicates a bad control board and the control board
(electronic control) should be replaced to solve this issue. Hope this
helps...please post back for further assistance.
Daniel
Oven Control Beeps
and Displays an "F"
Error Code
Electronic control has detected a fault condition. Push CANCEL pad to clear the display
and stop the display from beeping. Reprogram the oven. If a fault reoccurs, record the fault
number, push the CANCEL pad and contact an authorized servicer.
220 views
Usually answered in minutes!
×