Computers & Internet Logo

Related Topics:

Question about Acer Computers & Internet

3 Answers

How to remove network sharing center

Posted by Anonymous on

3 Answers

Youssef Abouza

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Habit-Forming:

    Visited the website for 3 consecutive days.

    New Friend:

    An expert that has 1 follower.

  • Expert
  • 24 Answers

Hold down the Windows key (Windows icon) and press "X". Select "Control Panel" in the menu.
Step 2: Locate Your Network Connections
In Control Panel click "View Network Status and Tasks". This will take you to the "Network and Sharing Center".
Now in "Network and Sharing Center" select "Change Adapter Settings". This will take you to your "Network Connection".
Step 3: Open the Properties of Your Wi-Fi Adapter
Right click the adapter that is connected (or going to be connected) to AirOrangeX and select "Properties".
Step 3: Disable Connection Sharing
In the adapter's Wi-Fi Properties select the "Sharing" tab.
Be sure that the check box indicated is NOT check and press "OK".
Internet connection sharing window
You have now disabled internet connection sharing

Posted on Oct 08, 2022

infobytesseo

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Welcome Back:

    Visited the website for 2 consecutive days.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 10 Answers

Computer network is many computers connected together either wireless or through cables. It enables sharing of data and transmitting information with the different computers. Infobytes, one of the leading IT networking companies in Dubai offer top rated IT solutions.

Posted on Oct 08, 2022

john xatzakis

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    New Friend:

    An expert that has 1 follower.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 22 Answers

Go at control panel (if you use windows 7), Network and Internet , Network and sharing center.Check where it says "View your active networks" , under the network you are using it will say Home network or Work network. Click that and change it into Public network.Voila, network sharing center has disappeared!

Posted on Jun 01, 2013

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Wireless connection

Turn off the laptop, unplug, remove battery, plug in. Push and hold the reset button for 30 seconds or so on the Netgear to reset to default settings. Boot laptop, when boot is complete, Open Network and Sharing Center, click on Manage Wireless networks, remove your OLD wireless network. Close Network and Sharing Center. In your Tray Notification Area , left click on the network icon, select unsecured Netgear Wireless Network. When connected, reconfigure SSID and Security Password.
tip

Set up a new Connection or Network

Creating the Network
Opening?the?Networking?and?Sharing?Center. You can launch the Network and Sharing Center in three ways . One way is to click the network icon from the right side of the taskbar, then click Open Network and Sharing Center .

un-ydpxpf3wblkuljzof3anecxv-4-0.png

A second (and the quickest) way is to launch the Run window by pressing the Windows key+R, typing control.exe/name?Microsoft.NetworkAndSharingCenter, then clicking OK .

un1-ydpxpf3wblkuljzof3anecxv-4-2.png

A third way is to choose Control Panel?->?Network And Internet?->?Network And Sharing Center .

un2-ydpxpf3wblkuljzof3anecxv-4-5.png

The Network and Sharing Center window is split into two areas . On the left side, there is a column containing shortcuts toward tasks, such as managing your wireless networks, changing settings for all network adapters, and changing network sharing settings . On the bottom of the same column, there are shortcuts to the Homegroup settings panel, the Internet Options panel, and the Windows Firewall panel . On the right side, you have basic information about the current network connection and links to several wizards that allow you to change some of your network settings .

un3-ydpxpf3wblkuljzof3anecxv-4-9.png
tip

How to set up your xbox media center with your pc media center

go to my computer right click on the hard drive then select properties then click on the sharing tab and click on advanced sharing, then click on share this folder then, ok, apply, ok, then click start at the bottom left of the screen, control panel, network and internet, network and sharing center,
then change the following settings.
network discovery= on

file sharing=on
public folder sharing=on (password required)
password protected sharing=on
media sharing=on


then do the following:
start your media center on your xbox and start the set-up process until you get the extender code, then go to the media center on your PC and go to tasks, then scroll right to add extender click on it and then follow the set-up process.
1helpful
1answer

Windows vista laptop failing to connect to some wifi networks including my home one.

Open Network and Sharing Center, Manage Wireless Networks, Remove your Home one. Exit Network and Sharing Center. reboot machine, Try to reconnect to your home one. If that fails, Release and renew IP : http://www.cs.cmu.edu/~help/networking/IP_renew.html
0helpful
2answers

Networking, file sharing

hello


right lick on the internet icon right side down of your monitor screen and select open networking sharing center and at the left side upper corner you see change advanced sharing center click for that one and turn on your TURN ON NETWORK DISCOVERY AND FILE PRINTER SHARING.


Thanks
0helpful
1answer

How to conect with wireless internet

The Network and Sharing Center in Microsoft* Windows Vista* can be used to set up a secure wireless connection to the Internet.

Note: If an Internet connection is not automatically made by the operating system, you may need to contact your access point (AP), broadband wireless router manufacturer, or Internet Service Provider (ISP).

Set Up a Secure Wireless Connection to the Internet


These steps assume that your network adapter; AP or router; and cable, DSL or another type of modem have already been physically connected and configured. They allow you to create a new connection and configure it accordingly.

Follow these steps to set up a secure wireless connection to the Internet.

Note: If a wireless profile does not exist, you will need to create a secure wireless profile before you can set up a wireless connection to the Internet.

1. Access the Network and Sharing Center.

2. Select Set up a connection or network.

3. Click Connect to the Internet.

cs025389_selectanetwork_configurationnotmatching.jpg

4. Click Next.

5. Select Wireless. At this point, if the network(s) that are listed say that the network settings do not match the network requirements, as shown in Figure 1, create a secure wireless profile and then follow the steps again.

6. Select a network and click Connect. If you are not connected to the Internet, you may need to contact your AP/router manufacturer or ISP.

Access the Network and Sharing Center


To access the Network and Sharing Center, use one of the following methods:
  • Start » Control Panel » Network and Internet » Network and Sharing Center
  • Start » Network » Network and Sharing Center
  • Right-click the network system tray icon (the icon that displays two computer monitors) » Network and Sharing Center


0helpful
1answer

Can't get my lap top to connect wirelessly to my router. Model # WRT54G2. The laptop says it is reaquiring the network address, but nothing happens.

The Network and Sharing Center in Microsoft* Windows Vista* can be used to set up a secure wireless connection to the Internet.

Note: If an Internet connection is not automatically made by the operating system, you may need to contact your access point (AP), broadband wireless router manufacturer, or Internet Service Provider (ISP).

Set Up a Secure Wireless Connection to the Internet


These steps assume that your network adapter; AP or router; and cable, DSL or another type of modem have already been physically connected and configured. They allow you to create a new connection and configure it accordingly.

Follow these steps to set up a secure wireless connection to the Internet.

Note: If a wireless profile does not exist, you will need to create a secure wireless profile before you can set up a wireless connection to the Internet.

1. Access the Network and Sharing Center.

2. Select Set up a connection or network.

3. Click Connect to the Internet.

cs025389_selectanetwork_configurationnotmatching.jpg

4. Click Next.

5. Select Wireless. At this point, if the network(s) that are listed say that the network settings do not match the network requirements, as shown in Figure 1, create a secure wireless profile and then follow the steps again.

6. Select a network and click Connect. If you are not connected to the Internet, you may need to contact your AP/router manufacturer or ISP.

Access the Network and Sharing Center


To access the Network and Sharing Center, use one of the following methods:
  • Start » Control Panel » Network and Internet » Network and Sharing Center
  • Start » Network » Network and Sharing Center
  • Right-click the network system tray icon (the icon that displays two computer monitors) » Network and Sharing Center
0helpful
1answer

I cannot connect to the internet and the only hint that my computer gave is about the wireless adapter. How can I resolve this? By the way, my OS is windows 7. Thank you!

Hi Azuka,

I got your issue , In your comp

1. Click on start go to control Panel--> got to network and sharing center

2.In the left side click on click on manage wireless networks

3. If you find any networks , right click on in it and click on remove it(remove each network one by one)

4.then go back to network and sharing center

5. Then in the Left side of network and sharing center , click on change adapter settings

6. You can find Wireless network connection, right click on it and click on disable

7. After disabling it right click on it again and enable it again

5. then right click on it and then go to connect/disconnect and connect to your wireless network

Please try this , it will work.

Thanks & Regards
Prema
0helpful
3answers

Windows Vista

In the start menu click network,on the bar on top click network and sharing center,scroll down and enable network discovery.
2helpful
4answers

Setting up a new computer on a wireless network

hello Danj29,

I suggest you make sure that your Vista is configured to connect to a private network. To do this follow these steps:

1. Click Start, right-click Network, click Properties.
-The Network Sharing Center window displays the network type in parenthesis after the network name.

2. To the right of the network name and type click Customize.
3. In the Set Network Location dialog box, click Private, and then click Next.
4. In the Successfully set network settings dialog box, click Close

By changing your network location type to private, network discovery is automatically enabled in the Sharing and Discovery section of the Network and Sharing Center window. The following additional file and printer sharing options must be manually enabled:
  • File sharing
  • Public folder sharing
  • Printer sharing
  • Password protected sharing
When all of these sharing and discovery options are enabled, your computer can:
  • Locate other computers and devices on your home network and have other computers locate your computer
  • Share its folders
  • Share its Public folder
  • Share its printers
  • Require user names and passwords for other computers that connect to the shared folders and printers of this computer
To enable file sharing, do the following:
  1. In the Sharing and Discovery section of the Network and Sharing Center window, click the down arrow next to File sharing.
  2. Within the File sharing settings, click Turn on file sharing, and then click Apply.
To enable public folder sharing, do the following:
  1. In the Sharing and Discovery section of the Network and Sharing Center window, click the down arrow next to Public folder sharing.
  2. Within the Public folder sharing settings, click one of the following:
    • If you want to share the public folder so that other computers on the network can access the Public share to open files, but not create or change files, click Turn on sharing so anyone with network access can open files. This is the default setting.
    • If you want to share the public folder so that other computers on the network can access the Public share to open files and also create or change files, click Turn on sharing so anyone with network access can open, change, and create files.
  3. Click Apply.
To enable printer sharing and share all of your connected printers, do the following:
  1. In the Sharing and Discovery section of the Network and Sharing Center window, click the down arrow next to Printer sharing.
  2. Within the Printer sharing settings, click Turn on printer sharing, and then click Apply.
[Optional] To enable password protected sharing, do the following:
  1. In the Sharing and Discovery section of the Network and Sharing Center window, click the down arrow next to Password protected sharing.
  2. Within the Password protected sharing settings, click Turn on password protected sharing, and then click Apply.
Hope you find this helpful info and thanks for using the FixYa service
Kind regards
Not finding what you are looking for?

89 views

Ask a Question

Usually answered in minutes!

Top Acer Computers & Internet Experts

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1198 Answers

shadow

Level 3 Expert

490 Answers

Brad Brown

Level 3 Expert

19166 Answers

Are you an Acer Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...