Question about Konka KDL-37AT23U Television

1 Answer

Unable to program remote

I purchased this new TV and for the first time ever I am unable to program by Cablevision remote control to turn on and off the television and to increase or decrease the volume. I have never had this problem with any other televison. There have always been codes(3 digit) to use to program the Scientific Atlantic remote which is what Cablevision of NY uses. I have to always have two remotes on hand to work different functions. I wish there was some way to get the appropriate 3 digit code to program the cable remote control. Thank-you for any assistance, Kathy

Posted by KayBee on

  • KayBee Aug 21, 2007

    Hello,
    I tried all the codes provided above and none of them worked. I await the next possible solution.

    Thank-you, Kathy

×

Ad

1 Answer

Anonymous

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 944 Answers

Have you tried the "KMC" code (should be 219). KMC is Konica Minolta who used to make Konka TVs. Here is the link to the programming instructions and all the codes if you need; http://optimum.custhelp.com/cgi-bin/optimum.cfg/php/enduser/std_adp.php?p_faqid=1420 If that code doesn't work, then apparently philips codes may work for your model (164, 005, 038, 093, 127, 070, 003, 004, 059, 236, 238, 243, 247, 199) (sorry you have to work through them one at a time). Hope the KMC one works :)

Posted on Aug 17, 2007

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

I cannot get any codes to work for my curtis international tv, using a samsung cablevision remote control.

Do a search function with this remote control. Try to download the user manual to your remote control by internet, for details.
tip

Why Am I Unable To Program The RCA Remote Control To Operate My Components

Why am I unable to program the RCA remote control to operate a component? Why am I unable to program the RCA remote control to operate a component? If you are unable to program the remote control to operate a component, review the following information:

Compatibility
If none of the programming procedures work, the universal remote control may not be compatible with your components, based on the type of infrared technology and the age of the components. Some RCA universal remote controls will only work with components manufactured after 1990.

Distance
If you are testing the remote control after you have entered a code, you may be too far away from the component or you may not have the remote control aimed directly at the component. Because the remote control uses infrared (IR) technology to communicate with components, there must be an unobstructed path between the remote control and the IR sensor on the component.

Code Entry Methods
If the Direct Code Entry method was used to enter the codes for your brand and the unit is still not functioning properly, try one of the automatic code search methods instead. During automatic code search, the remote searches for the correct code to program.

Modes
For the remote control to know which component you wish to operate, you must put the remote control in the correct mode by pressing the corresponding component button.

Combo Units
To program the remote control to operate combo units, such as TV/VCR’s, TV/DVD’s, or TV/VCR/DVD’s, use the combo codes in the Code List to program the individual corresponding component buttons. Once programmed successfully, the TV button controls the TV functions on your unit, and the DVD or VCR button controls the DVD or VCR functions, respectively. The codes in the combo section should be tried first, using the Direct Code Entry method on the TV and DVD or VCR buttons. If this is unsuccessful, use one of the Code Search methods to program your combo unit.

Batteries
Make sure the batteries are new and properly installed.
0helpful
1answer

Coby TF TV 3227: unable to control volume

The post is a little unclear, but I will assume you are attempting to say that your remote works with the cable box but not the television.

If you are using the remote that came with the cable box, you will probably need to re-program it using the codes in the back of the cable box manual. If you are using a universal remote, you will still have to re-program it, but those codes are in the manual for the universal remote.

If you cannot find a code in the books, there is an alternate method of programming the remotes using a search function. The exact steps will be available in the respective remote manual.
0helpful
1answer

How do i connect my new lg tv to my cablevision remote?

The “cablevision remote” will have to be programmed to work the LG TV.
The programming directions should be in the “cablevision remote” user book, online, and or you could call your cable provider for the directions on how to program the remote.
1helpful
2answers

Trying to program my sansui tv with the cablevision remote control. unable to find codes

You have to do the universal way which involves:
1) turn on tv and dvr
2) press tv button + select, hold till the io button stays lit (5seconds)
3) once io button is lit, press up and down channel buttons and flip through them until the tv turns off.
4) press mute, this should turn the tv on.
5) press tv button to save the settings (turn off tv)
0helpful
1answer

Code for cablevision remote control

Hello Monica24g. I also have Cablevision and found the codes I was looking for. I assume you have an Audiovox (fpe1907) television. Here are some codes you can try: 076 103 043 035 224 228 078. Press the "TV" button and the "SELECT" simultaneously for 3 seconds. The IO button will light up. Enter one of the codes, then press the "TV" button again. I hope this helps!
0helpful
1answer

Olevia tv

sorry...........cablevision remote does not have (not even default) code...i've tried too....use the olevia remote to control tv,cable,vcr (lol) and dvd (or universal remote)....olevia, vizo are brand new devices and not in any remote catalogs before 2007
0helpful
1answer

Programmimg my Big Sentry Remote control

I have a sentry big remote RMC10 and I need the code to program my sony cablevision box.It doesn't even have a sony or a cablevision box listed in the book.

John
0helpful
4answers

Unable to tune in generic remote control

I have the code book for this remote.  I am having difficultly with my Sharp CD player.

Codes for panasonic tv 0011,0024,0032,0106,0118,0131,0139,0212,1083,1140

codes for pioneer dvd
5008

hoped this helped someone
0helpful
1answer

Re: tv unable to program channels

NO!!! you need to auto program the T.V go through the menu and find auto progeam its easy
Not finding what you are looking for?
Konka KDL-37AT23U Television Logo

575 views

Ask a Question

Usually answered in minutes!

Top Konka Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76620 Answers

Paul Bade

Level 3 Expert

1688 Answers

 Grubhead
Grubhead

Level 3 Expert

5720 Answers

Are you a Konka Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...