Question about Motorola Mobility RAZR V3
Trying to start it up again = any solutions?
The LCD flex connector is very sensitive. 4/5 of the RAZR screens I see go out are due to a loose flex connection. It's super easy to fix it. Take off the battery door. There are two T6 screws. Take them out and pop off the bottom of the phone. There are two flex cables: one for the keypad, the other for the screen. Connect the flat cable (screen cable) first. Then connect the bent (keypad) cable. Put back together. Voila.
Posted on Aug 28, 2007
you have a prob in its flex connector or worst you have a defective LCD...
try replacing flex first..
306 views
Usually answered in minutes!
×