Toshiba e-studio 55 has 2'' wide black line on all copies

Toshiba Copiers STUDIO456

http://business.toshiba.com/media/downloads/products/506seriesm_Web_high.mov

Toshiba Copiers STUDIO456

e-STUDIO456
Key Features

• Up to 45 PPM
• Black & White MFP
• Sml/Med Workgroup
• Copy, Print, Scan, Fax
• Secure MFP
• Eco-Friendly
• MSRP $12,989 (Base Unit)

Check the developer drive gear,
behind the mother board,,,view the two clutch left side clutch is developer drive clutch, open & check the gear.

sir i have a toshbia estudio 600 the copy is coming light but i put the toner manually in the developer tank the copy is o.k. toner is full and the developer also new

How con i INCREASE , color of copy in toshiba 452
please sent to my add the GUIDE code toshiba 452
[email protected]

http://www.ebookbay.com/ebook/935/toshiba-e-studio-200l-202l-230-232-280-282-smhh here is the service manual for Toshiba e studio 232/282

just clean the right area glass ( the width narrow rectangular glass area ) at the right top glass.

Copier is copying pages with dark areas down at the bottom.

Hello sir; Is the stripes allway in same place and you use document feeder to copy, then you have to clean up a piece stripe glass on the plateform, otherwise ,you have to change drum cleaning blade or drum cartridge.

"Normally" that is a simple problem. If it copies clean when you lay your original on the glass......but when using the Automatic Document Feeder (ADF) the copy has a black line then it is clearly something in the ADF scanner. Some machines use a strip of glass that is next to the large glass to scan originals when using the ADF. That strip of glass has to be clean top and bottom. Some models use a scanner in the actual ADF. Either way if it copies fine from the glass, the rest of the copier is eliminated from being the cause.
Is your machine under maintenence contract? Then I would keep calling them until they FIX it!

U need to check your developer material. How many copiers has been made?

U can also perform 05-200 for the auto toner adjustment. The value should be in the range of 235-245% ( 2.35v - 2.45v )