Question about Sony Cyber-Shot DSC-P92 Digital Camera

1 Answer

Cyber-Shot DSC-P92 saves and wont save to memory

Sometimes the camera wont save to memory, if iturn it off and on again it will, is there a remedy, new firmware ?

Posted by on

Ad

1 Answer

Take a dry cloth. put 1-2 dropes of water on it then Wipe the memory stick contacts.

Posted on Sep 10, 2007

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can i update camera firmware through a printer dock?


Kodak does not suggest a firmware upgrade through a printer dock. Instead, they recommend using an SD card (memory card).

First:
  1. Click Download, then save the firmware file to your computer desktop.
  2. Double-click the *.exe file. When the WinZip Self-Extractor screen appears, select a folder or accept the default location, then click Unzip. The firmware file unzips to the specified folder.
  3. Note the location of the *.FW file, then close the WinZip Self-Extractor.
Instructions:
  1. If you have pictures/videos on your camera's internal memory or on the memory card, save them to your computer.
  2. Ensure that your camera batteries are fully charged.
  3. Turn off your camera.
  4. Insert the memory card into your computer or into a card reader attached to your computer.
  5. Verify that the memory card has at least 100 MB free space.
  6. On your computer, select the removable drive associated with the memory card or card reader.
  7. If a System folder does not exist on the memory card, create one. From the removable drive window, select File > New > New Folder, then name the new folder System.
  8. Copy the *.FW file from your computer into the System folder.
  9. Remove the memory card from your computer or card reader, then insert it into your camera.
  10. Turn on your camera, then follow the instructions to begin the firmware upgrade. The upgrade takes approximately two minutes to complete.
  11. When "Upgrade was successful" appears on the LCD, select Delete Upgrade File to delete the firmware file from the memory card.
  12. Turn off your camera, then turn the camera on to activate the new firmware.

Feb 07, 2014 | Kodak EasyShare P880 Digital Camera

1 Answer

I cannot get my new laptop to recognize my canon eos rebel camera. Software is installed, drivers are there but the computer doesn't see the camera when it is connected and turned on.


Best fix for this is to purchase a Card Reader and step around downloading from the camera. A card Reader is looked at by the computer as an external storage device. You place the memory card into the card reader and down load from there. Don't forget to stop or safely disconnect or eject before removing your memory card. Once you have placed the memory card back into the camera Format the memory card to give the camera a fresh clean surface to work with again.

What is happening is that the firmware of the camera is no longer compatible with the "new" software from the computer.

Even though you may not have updated the software in the computer if it's hooked to the Internet then sometimes there is auto updated and these are what sometimes causes the problem with incompatibility.

Also if you haven't updated the camera Firmware now would be a good time to look see what Canon has to offer as free updates in Firmware for your camera it's a free update.

Apr 18, 2011 | Canon Rebel XT / EOS 350D Digital Camera

1 Answer

When I go to download the photos to the computer it says the card need to be formatted but it was before i took pictures. How do I get the pictures from the card to the computer


Welcome to FixYa.

First, I suggest that you have to clean you memory card using soft and dry cloth after that try to format it again and save it.

After you formatted your memory card, now try to upload it to your computer. Sometimes memory card wont work because is not formatted for the camera used you said that you already formatted it before, possible that you forgot to save all the settings and formatting that you've done before.

I hope this information can help you to resolve your issues.

Thank you for using Fixya.

Apr 04, 2011 | Cameras

1 Answer

My Verbatim 32 GB SD Memory Card wont work on my camera. It keeps tellin me me to please reinsert the memory card. But my camera works with my other memory cards. Can you tell me what might be the problem...


Without knowing what make or model of your camera I can't research its memory capacity. A 32GB SD card is a massive amount of memory for most if not all point and shoot cameras one problem may be that your camera doesn't have the firmware to support this card. One other thing is the SDHC is a new style card and if you are not aware it has a lock on the side of it I'll include a diagram. The lock needs to be pushed towards the top of the card in the direction of the gold contacts. Once this is done you will also need to see if you can format the card in the camera you are going to use it in. If it formats then it'll work if it doesn't format then it won't work unbtil you update your camera firmware.

Diagram
tri3mast_110.jpg

Jan 06, 2011 | Cameras

1 Answer

My camera will not save photos to memory card


Please try to take out your memory carrd and format it in your PC. there after save some files/photos to the meory card to test the memory. Format it once again and reinsert into yourr camera. If this wont work ther is a fault within the camera processor controller which may require help. replace memory card if otherwise. Hope you try. Good day

Aug 13, 2010 | Nikon Coolpix S210 Digital Camera

1 Answer

Kodak easy share C813, the display is over saturated


Using exposure compensation to adjust picture brightness Before you take a picture, you can adjust exposure compensation to make pictures darker or lighter.
The exposure compensation level is shown on the LCD; the LCD gets brighter or dimmer.



OR

You need to upgrade the firmware.

Download this file to your pc and follow the instructions:

Firmware Download

Installation Instructions IMPORTANT: Print this page before continuing.


Prepare your Camera CAUTION: Loss of power during the firmware upgrade can render your camera inoperable.
  1. Connect the optional KODAK AC Adapter, or install a new or fully charged battery in the camera.
  2. If you have pictures on the internal memory of your camera or on a memory card, save the pictures to your computer.
Download and Extract the Firmware File
  1. Download the file to your computer.
  2. Double-click the file to start the WinZip Self-Extractor.
  3. Select Unzip to folder, and specify a location, or leave the default location.
  4. Click Unzip. The firmware file unzips to the specified folder.
  5. Note the location of the folder. The file has a .fw file extension.
  6. Close the WinZip Self-Extractor.
Select a Method
  • If you do not have a memory card and card reader, use Method 1.
  • If you have a memory card and a card reader, use Method 1 or Method 2.
Method 1
  1. Visit the EASYSHARE Software Web page at www.kodak.com/go/easysharesw, and download the latest version of software.NOTE: EASYSHARE Software version 6.x or later must be used during this procedure.
  2. Remove the memory card from the camera.
  3. Turn on the camera.
  4. Format the internal memory of the camera:
    1. Press the menu button.
    2. Select Setup.
    3. Select Format.
    4. Select Internal Memory.
    5. Press OK.
    6. Press OK to continue.
  5. Connect the camera to your computer using a USB cable.NOTE:The first time you connect your camera to your computer, Sync andTransfer Setup or Sync and Transfer Assistant prompts appear on thescreen. Follow the prompts to set up the camera as a device in thesoftware.
  6. Start EASYSHARE Software.
  7. Select Tools > Sync and Transfer Manager.
  8. Select your device from the list in the left column, and then select the Info tab.
  9. Click Update Firmware, and go to the location where you downloaded the firmware file.
  10. Click Open to copy the file from your computer to the internal memory on the camera.
  11. Turn off the camera, and then disconnect the USB cable from the camera.
  12. Turn on the camera and follow the on-screen instructions to complete the upgrade. The upgrade takes approximately two minutes. When it is complete, the camera will delete the firmware file from internal memory.
  13. Turn off the camera, and then turn it back on again.
Method 2
  1. Remove the files from the memory card.
  2. Place the memory card in the card reader.
  3. Open the drive corresponding to the memory card to view the card contents.
  4. Check that a System folder exists on the memory card. If not, create one.
  5. Locate the firmware file on your computer and copy it into the System folder on the memory card.
  6. Remove the memory card from the card reader, and insert the memory card into the camera.
  7. Turn off the camera.
  8. Turn on the camera and follow the on-screen instructions to complete the upgrade. The upgrade takes approximately two minutes.
  9. Turn off the camera, and then turn it back on again.


Sep 10, 2009 | Kodak Easyshare C813 Digital Camera

1 Answer

Memory cards wont format, says card is full


Is the write protection enabled on the cards?
Which size having the cards?

The spec for the SD card format is going to 2GB but the Kodak C330 not compatible with 2 GB SD memory cards.

Click

But try an firmware upgrade.
Why download firmware version 1.07?
This firmware version improves memory card compatibility and provides general performance updates.
KODAK EASYSHARE C330 Zoom Digital Camera Firmwar

May 17, 2009 | Kodak EasyShare C330 Digital Camera

3 Answers

Write error and read error appear after picture is taken.


pls update ur firmware from here it would likely resolve problem

http://www.fujifilm.com/products/digital/download/s1000fd/fupd.html

get back to me if it doesnt and do rate me FIXYA for help

Mar 29, 2009 | Fuji FinePix S1000FD Digital Camera

2 Answers

A830 wONT STAY ON.


DaddyCass, I'd like to recommend to you that you put in new, not bought recently, or just charged, but new "Alkaline" batteries - don't skimp out on the black Eveready or the red ones (Energiser and Duracell are good).
Do this to be sure, because it really sounds like a power problem, and if you are using rechargables, you're rechargeables may be on the way out, supplying enough power to run low-powered items, but not enough for a high-load item like a digital camera.
Try this and let us know what eventuates.

**.The best way to acknowledge contribution is to rate it's relevance.**

Feb 05, 2009 | GE A730 Digital Camera

2 Answers

New memory card and the camera says its full


try doing a format with the camera. check your manual to see how to do this with your camera. Beware, formatting will erase anything on the card. i actually had the same problem with my camera, and this worked for me. Sometimes new flash cards are not compatible off the shelf--they need to be formatted. You should have at least flash cards to be sure card is not defective. Let me know if this helps!

Dec 02, 2008 | Kodak EasyShare C330 Digital Camera

Not finding what you are looking for?
Sony Cyber-Shot DSC-P92 Digital Camera Logo

Related Topics:

78 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Cameras Experts

Vish Iyer
Vish Iyer

Level 2 Expert

75 Answers

 Larry
Larry

Level 2 Expert

126 Answers

 MikeWang
MikeWang

Level 2 Expert

42 Answers

Are you a Sony Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...