Question about Uniden 5.8GHz Cordless Phone

2 Answers

Uniden twin cordless phone

I have two handsets with my uniden cordless phone. My problem is when i make a call, i could hear the other party clearly by they could not hear me, just a very faint sound when i talk loud. I tried to check if my phone is on mute and it doesnt show the M on the display which means its not on mute mode. The problem occured on the first handset then after a week, the other handset had the same problem and i could not fix both handset.

Posted by pea_nat on

  • 3 more comments 
  • l3isme Dec 24, 2007

    Exact same problem with me and my parents have a set as well - and there set is doing this also. Sometimes it just cuts out my voice intermittently (about every 12 or so words) and sometimes others can't hear me after we have been talking a while.

  • sneha6477 Feb 10, 2008

    My phone has the same problem.I can hear people when they call but they cant.Also there is a continuous dial tone and the phone lets me dial the number but then cuts it off with the dial tone.

  • MARANIE Mar 09, 2008

    I HAVE A UNIDEN 5.8 GHZ MODEL CXA15198. I JUST BOUGHT A NEW BATTERY FOR THE CORDLESS HANDSET BECAUSE PEOPLE WERE HAVING TROUBLE HEARING MY PART OF THE CONVERSATION. STILL HAVE THE PROBLEM???? I WONDER IF THE UNIT IS RE-CHARGING THE HANDSET??? I ALSO FOLLOWED ALL THE STEPS SUCH AS DISCONNECTING THE BATTERY, PHONE, CHARGER ETC. STILL DOESN'T WORK PROPERLY????

  • EonD Jul 19, 2008

    Me too - I have an older Uniden 2.4ghz model that works on the same line, same cables, same everything. I plug in the new phone - I hear the dial tone , can only ring on "pulse" and when people call me I can hear them , but they can't hear me ????

  • lapeute May 22, 2009

    i can hear people but they can't hear me, i've tried selecting a different channel but no luck, can anyone help with this cordless phone

×

Ad

2 Answers

Anonymous

I think Garfunkels solution is useless, as this would be somthing any normal person would do, how about putting up an answer that includes some more info than this, good answer lightbright.

Posted on Apr 27, 2008

Ad

Anonymous

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 56 Answers

I think i've heard of this problem with other uniden phones as well. if they're new, take them back, ask for an exchange

Posted on Aug 16, 2007

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Uniden Dect 6.0 cordless phone with one expandable handset. Unfortunately when I call to anybody or receive any call my voice is not audible to other party, though I can hear clearly.


This is most likely the microphone, you need to inspect the area with the little holes for stuff stuck in there. The only other thing you can do is get another hand set

Aug 02, 2018 | Uniden Lands Phones

1 Answer

I have a Uniden cordless phone #D2CT 6.0--I love the phone but the party on the other end of the line can barely hear me -how can I fix this or this a bad phone???


At 20 ft line of sight, you should have perfect reception with most any cordless phone.

The fuzzy signal can indicate:
1.
A weak signal between base and handset.
20 ft line of sight should have a good strong signal.
Your handset may be defective.
Or, your handset battery may be weak.
Your base unit may be defective.

2.
You may be experiencing RFI Interference.
Is the base unit next to any other electronic devices?
If it is next to a wireless router or some other wireless device, it may be overloaded by the nearby signal (even if on a different frequency)

I've got a 5 year old Panasonic 5.8 Ghz cordless phone connected to my VoIP box. I just tested it from about 25 ft away from the base unit in another room with a wall in between and my reception is perfect.

I did the same test with my Panasonic DECT 6.0 phones (1.9 GHz). The first handset is slightly fuzzy, but otherwise good signal. The 2nd handset was perfectly quiet with good strong signal. So, there is a difference between two identical handsets connected to the same base unit. This indicates to me that one handset is better tuned than the other. Nothing I can do about that but get a new 2nd extension cordless handset. Sometimes, it's just luck of the draw

Feb 15, 2011 | Uniden DECT 6.0 Cordless Phone ID

2 Answers

ADDING HANDSET SAYS OUT OF RANGE


A search of Uniden support only said to call 1-800-297-1023 with handset registration issues. The rep picked up quickly and walked me through the reset procedure. Here it is step-by-step:

1. Remove battery
2. Hold down the * and # buttons and reinsert battery. You should hear a long beep. If not retry. (This is a bit awkward but hold the handset upside down and it's workable)
3. Screen will be blank. Immediately press the right soft menu button.
4. Screen will report that EEPROM is clearing and then state EEPROM Clear Ok
5. Remove battery (yes again)
6. Reinsert battery (this time there's no need to hold down any buttons)
7. Handset will reboot with Welcome screen and then state that phone must be registered (this is the status a handset should be in from the factory)
8. Place handset on base and it will register as normal

Aug 02, 2009 | Uniden DECT 6.0 Cordless Telephone...

1 Answer

Unable to register the handsets to my Corded/Cordless combo phone


You must charge each phone individually on the main base unit for at least 20seconds before use. Do this with each phone-again on the main base unit, then you should be able to register and return other phones to separate cradle. I hope this works for you

May 26, 2009 | Uniden Cordless Phone

1 Answer

I need help with my cordless handset


Replace the condenser mic on the handset.

May 23, 2009 | Uniden Cordless Phone

1 Answer

Calling party cannot here receiving party


This can be one of a couple of things. First of all, if this is a multi-handset phone, go off hook on two handsets at the same time and see if you can hear yourself in both phones (Speak into one while listening to the other) If it is only a single handset phone, do the same thing only with another phone. If you cannot hear anything coming from the uniden phone, it may have a bad mic in the handset and would need to be replaced. (the handset not the mic) If you bought it less then a year ago and still have the receipt, call uniden at 18002971023 and they will help you get it replaced.

Mar 22, 2009 | Uniden Cordless Phone

1 Answer

Cordless phones expandable to 4 with T-coil


Any Uniden DECT 6.0 series phone will have T coil and can expand to either 4 or 5 handsets.

Feb 02, 2009 | Uniden CEZAI998 Phone

1 Answer

My voice cannot be heard by other party on line


check on the on-screen display that you have not activated the "Mute" feature on those handsets.. if you have then you should be able to deactivate via the in screen menu

Jan 08, 2009 | Uniden Cordless Phone

1 Answer

My voice is not heard on my Phone


Any kind of intermittent transmission problem, or solid transmission problems you mention are directly related to your phone. I'm not sure what kind of phone you have. If this is a typical home phone, it would either be the handset or the handset cord. If this is wireless, its the entire handset.

Oct 06, 2008 | Uniden DCT646-2 Cordless Phone

Not finding what you are looking for?
Uniden 5.8GHz Cordless Phone Logo

Related Topics:

529 people viewed this question

Ask a Question

Usually answered in minutes!

Top Uniden Lands Phones Experts

Cindy Wells

Level 3 Expert

6082 Answers

Marvin
Marvin

Level 3 Expert

85231 Answers

martin hogg

Level 2 Expert

157 Answers

Are you an Uniden Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...