Motokrzr problem When I tried to download ring tones, some files were deleted by accident. Now the display is black. I can't place and receive calls. How to restore missing files. Thank you, Rachel

those ring tones are build into the phone and can't be removed.

for downloading the mp3 go to market place on your menu and connect to internet and download all application such as ring tone \ theme\ game and etc

for deleting the contacts you have to go to your sim contacts information and at that place find menu and frome properties try to delete which contact you want

Some how your phone was reset or had the tone turned off. Just follow the below guide and your audio should come back on. I would do a soft reset (turn off the handset, remove the battery then reinsert) before performing the instructions.

Tone settings
To select a ringing tone for voice calls, select Tones >
Ringing tone.
To select a ringing tone for video calls, select Tones > Video
call tone.
To set the ringing type, select Tones > Ringing type. You
can also set the device to sound a ringing tone that is a
combination of the spoken name of the caller and the
selected ringing tone, when someone from your contacts list
calls you. Select Tones > Say caller's name.
To set the volume level of the ringing tone, select Tones >
Ringing volume.
To set the various alert tones, select Tones > Message alert
tone, E-mail alert tone, Calendar alarm tone, or Clock
alarm tone.
To set the device to vibrate when you receive a call, select
Tones > Vibrating alert.
To set the volume level of the device keypad tones, select
Tones > Keypad tones.

I have included a link to download your user manual if needed, it comes as a PDF file so you need to have adobe PDF down loader

http://nds1.nokia.com/phones/files/guides/Nokia_E63-1_UG_en.pdf

Activating Personal Ring
You can assign special ringer tones to anyone in your phonebook. When your phone gets a call, it looks up the Caller ID information in your phonebook. If you've assigned a personal ringer to that number, the phone uses it so you know who is calling. To turn the personal ringing on or off, follow these steps:

1. Press [Menu/Select]. Select the HANDSET SETUP menu, and then the PERSONAL RING submenu.
2. Move the cursor to select ON or OFF.
3. Press [Menu/Select]. You will hear a confirmation tone.

Selecting a Ring Tone (Handset only)
You may choose from four melodies or three tones for your phone's primary ring tone. Each handset can use a different ring tone or melody. The available ring tones are as listed:

1. Press [Menu/Select]. Select the HANDSET SETUP menu, and then the RINGER TONES submenu.
2. Move the cursor to select a ring tone. As each ring tone is highlighted, you will hear a sample.
3. When you hear the tone you want to use, press [Menu/Select]. You will hear a confirmation tone.

Adjusting the Speaker Volume
Handset Speakerphone: You can choose from six volume levels for the handset speakerphone. To adjust the speaker volume while on a speakerphone call, press the UP Arrow button (to make it louder) or the Down Arrow button (to make it softer).
Base Speaker: You can choose from ten volume levels for the base speaker. To adjust the speaker volume while call screening or playing messages, press [volume +] (to make it louder) or [volume -] (to make it softer).

Adjusting the Audio Tone
If you aren't satisfied with the audio quality of your phone, you can adjust the Audio Tone of the earpiece while on a call. Your phone gives you three audio tone options: low, natural and high; the default setting, Natural Tone, is recommended for hearing aid users. Audio tone adjustments only apply to the earpiece, not the speakerphone.
To adjust the audio tone:

1. While on a call, press [Menu/Select].
2. Move the cursor to select AUDIO TONE, and then press [Menu/Select].
3. Move the cursor to select desired option (HIGH TONE, NATURAL TONE, or LOW TONE), and then press [Menu/Select]. Selected option appears in the display for two seconds, and then the display returns to normal.

Deleting Phonebook Entries
You can delete a single phonebook entry at a time or all phonebook entries at once:
To delete a single phonebook entry:

1. When the phone is in standby, press the phonebook key.
2. Find the entry that you want to delete and press [Menu/Select].
3. Select DELETE. DELETE ENTRY? appears in the display.
4. Move the cursor to select YES.
5. Press [Menu/Select]. You will hear a confirmation tone, and DELETED! appears in the display.

Deleting Caller ID Numbers

1. To delete only one Caller ID number, press the Caller ID button when the phone is in standby, and then find the number you want to delete.
2. Press [Menu/Select] and select DELETE ENTRY.
3. When the phone asks you to confirm, select YES.

1. To delete all the Caller ID numbers, press the Caller ID button when the phone is in standby, and then press [Menu/Select].
2. When the phone asks you to confirm, select YES.

Note: When you delete a Caller ID number, you delete it permanently.

Deleting a Redial Record
If you want to delete a phone number from the handset's redial list, follow the steps below:

1. When the phone is in standby, press [Redial/Pause].
2. Use the UP Arrow button and the Down Arrow button to scroll through the redial list.
3. When you find the redial number you want to delete, press [Menu/Select] and select DELETE ENTRY.
4. When the phone asks you to confirm, select YES. The redial number is deleted.

Resetting the Voice Message Waiting Indicator

1. When you receive a new voice mail message, the new message LED on the top of the handset flashes and VM appears in the handset display.
2. In the event your message alert tone gets out of sync with your phone company's voice messaging system, you can reset back to its original "no messages waiting" state.
3. To reset, press and hold [find hs] on the base for five seconds.
4. A beep sounds and the message alert tone is reset.

I’m happy to help further over the phone at https://www.6ya.com/expert/jeremy_69f3cc28d95bf514

Hi!

It is very easy

To Send Fax:
1. Place the documents facing down in the flatbed scanner glass or insert in the ADF unit with the documents facing up.
2. Press the Fax button
3. Key in the number of the receiver then press the black or color START button.
4. Listen to the dial tone and see in the lcd display the message "transmitted" to confirm that the documnets have been sent.
Using the phone is attached to your printer (documents is already load to the printer)
1. Call the number of the receiver.
2. Ask for a fax tone.
3. Once you heard the fax tone, press the Black or Color Start button

To Receive Fax (Set up first the number of calls before automatic giving fax tone to caller)
1. When someone is trying to send a fax to you, don't answer the ring on the phone, let the printer give the fax tone.
To receive the fax on the printer with the user's help.
1. When someone is calling, just press the Black or Color Start button.
To receive fax when you answer a phone
1. While the phone is lift up, press the Black or Color Start button to receive the fax.

Hope that information will guide you.
You can thank me by just rating this help.
Thank you for using Fixya.

Hello there! thanks for using Fixya.com!

Try the following instructions, to personalize your Nokia E50!
Profiles
Warning: In the offline profile you cannot make or receive any calls, or use other features that require network
coverage. Calls still may be possible to the official emergency number programmed into your device. To make calls,
you must first activate the phone function by changing profiles. If the device has been locked, enter the lock code.

Select Menu > Tools > Profiles.
You can adjust and customize the ringing tones, alert tones, and other device tones for different events, environments, or caller
groups.
To customize a profile, scroll to the desired profile in the list, and select Options > Personalise.
Define the following settings:
• Ringing tone — Select a ringing tone from the list, or select Tone downloads to open a bookmark folder containing a list of
bookmarks for downloading tones using the browser. To listen to the selected tone, select Play. If you have two alternate
phone lines in use, you can specify a ringing tone for each line.
• Say caller's name — Activate the text-to-speech ringing tone feature. When someone from your contacts list calls you, the
device sounds a ringing tone that is a combination of the spoken name of the contact and the selected ringing tone.
• Ringing type — Select how you want the ringing tone to alert.
• Ringing volume — Select the volume level of the ringing tone.
• Message alert tone — Select a tone for received text messages.
Or you may still go to this website for more info! http://nds1.nokia.com/phones/files/guides/nokia_E50

did the tones come pre installed on the phone? why dont you try using mp3 ring tones? download mp3 songs on your phone, then you can set them as ring tones. they work much beter than ordinary ring tones

HI Qrasengan,
1) Open the menu, and go to profiles.
2) Enter the general option, and click on personalise.
3) after that, several option appears.
4) some of them are ringing tone, ringing type, ringing volume, message alert tone, vibrating alert, etc.
5) Go to message alert tone and change the tone u want to listen when message is received.
NOte :Only wav or midi formats are accepted as ringing tone. MP3s are not accepted as ringing tones in NOKIA 6600. U need to install a software "mp3 as ringing tone" or "mp2wmaogg.codec" to make mp3 as ringing tone.
===============================================
If u want that software, send me feedback or reply.
And I will deliver u as email in ur email id.
Sajan([email protected])

Are you using mp3 files?

I use them and most of the factory phone sounds seem to be mp3 too. Not all mp3 files seem to work though, I've had to try several - could be worth using a sound editor like audacity to get the sound file details correct.