To make a Conference Call
1. While on a call, press Cnf/Trn_____.
2. Dial a [DN] (or access an outside line and
dial an external telephone number).
3. Press Cnf/Trn after the called party answers.
All parties are conferenced together.
If you added an outside line to the call, press
Cnf/Trn again before hanging up to allow
the outside parties to continue talking. (If
you do not, the call is disconnected).
Note Some types of outside lines
(“unsupervised”) do not automatically
disconnect when conferenced parties
hang up. In this case, press one of the
flashing buttons to monitor the
conference.
If the parties are still on the line, press Cnf/Trn
+ Spkr, then hang up. When no one is
on the line, press Spkr to disconnect the
lines.
I believe that if you reach a busy signal, you can hang up. The conference should ring you back and the rest of the conference will be there.
Here's what the documentation shows from within the help of a 3300 ICP/MCD...
a 5303 is to be treated just like a 2500 series set...
2500, 5302 IP
Phone, SUPERSET 401, SUPERSET 401+, and SUPERSET 4001
telephones:
To form a Conference when a two-party call is already in place, or
to add another party to an existing Conference:
Press Flash or flash the
switchhook.
Dial the number of the next party.
Wait for an answer.
Press Flash or Flash the
switchhook.
Dial the Conference Call Feature Access Code.
To Leave a Conference:
Hang up.
2500 telephone:
To split a Conference and speak privately with the original
party:
Flash the switchhook.
Dial the Conference Call Split Feature Access
code.
485 views
Usually answered in minutes!
×