Question about BlueTrek G2 Consumer Headset
The default password is "0000" four zeros. You can download the manual & pairing guide on the link below: http://www.bluetrek.com/support/g2/index.htm Please update the question & let us know if the information given was useful to you - Good Luck!
Posted on Aug 15, 2007
Tips for a great answer:
Aug 08, 2010 | Cell Phones
Jun 20, 2010 | BlueTrek G2 Consumer Headset
May 09, 2010 | BlueTrek G2 Consumer Headset
Mar 11, 2010 | BlueTrek G2 Consumer Headset
Nov 20, 2009 | BlueTrek G2 Consumer Headset
Sep 19, 2009 | BlueTrek G2 Consumer Headset
Just had the same problem.
But I found some bluetrek instructions on the net & it works
Pairing the BLUETREK® G2
Before using the BLUETREK® G2 headset, you must pair it with your Bluetooth® mobile
phone. Pairing is the process of linking 2 Bluetooth® devices, so that they can
To initiate pairing:
1. Place the BLUETREK® G2 and your mobile phone within 0.3 meter (1 foot) from
2. Switch on your phone and select its Bluetooth® discover mode (refer to the
Bluetooth® mobile phone user manual).
3. When the BLUETREK® G2 is switched off, press and hold the TALK button for
about 7 seconds until the indicator light flashes red and blue alternatively. And a
sound can be heard in the speaker.
4. Once the mobile phone detects the headset, a “BlueTrek G2” message will be
displayed. Follow the phone instructions to accept the pairing. The PIN code (or
passkey) is 0000, then press “yes” or “ok”.
If pairing success, the indicator light will switch to blue and flashes slowly.
If you haven’t started the discovery mode within 5 minutes, the headset
Jun 26, 2007 | BlueTrek G2 Consumer Headset
200 people viewed this question
Usually answered in minutes!