Change input mode - Sylvania 6419TE 19" TV

You can use the input menu button on the TV as well as the remote to change the input.

Good morning Cheri
try restarting the tv, just disconnect all electricity for 30-60 sec.
connect again. If that does not work, Try set- up on the menu, if you get the apparatus to obey you and leave the input mode.
If that does not work I always restart the router and "exchange"box,
enjoy your day
kolbrub

Hello
You can set the Game mode and External input mode at the same time by pressing the GAME button on the remote control. "GAME" appears on the TV screen. To exit the the Game mode and the external input mode, press the GAME button on the remote control again. To cancel GAME mode only, adjust the PICTURE control. The game mode will be set ot 'OFF" automatically. In this case "VIDEO" instead of "GAME" appeares on the TV screen. When you press the GAME button if the TV is off, the TV turns ON and will be in the GAME mode and external input mode automatically.

Restart your computer, and keep pressing F8 until you see the Windows "start-up" menu.
Choose "start in safe mode" (to get 800-by-600 mode, which the monitor should accept).
Change the "input timing". Shutdown & restart.

Try channel button to 1-2-3--99-98-1-2-3 up & down it should come between 0 & 1

Tuner is only analog. As for the Video 1 input you need to go into the menu and change it to the digital port you want to use (optical, coaxial or HDMI) you can set only one input to each digital input port.

You set may be set to Home Theater mode.
I think it is in the advanced menu.
Set home theater to off. This will fix the input on the television to input one, no matter what you do.

I hope that this helps you.
asnowman

on your remote there is a input button if you
have the factory remote.press this and will
change inputs.

You can try starting the music on your computer before trying to change the input on the receiver, maybe it needs to recognize some input before it will change if this doesn't help double check your connections & settings ?

plug in hdmi input into the input that is displayed on screen. if no change, plug into another input and change input to the device