Question about Galaxy Radios DX-66V Base CB Radio

1 Answer

Lost channels in a galaxy 66v cb radio

I've lost a complete set of channels in my radio. I lost the whole 11 meter band and possibly another band. I need to know how to get my channels back. And the transmit frequency changes when you key the mike but goes back to normal on recieving

Posted by ddubb02us on

  • Anonymous Mar 16, 2014

    what is the frequence for channel 19cb radio frequencies list

  • Anonymous Mar 18, 2014

    my galaxy ham radio turns on and recieves, but it will not transmit until the radio is on for a while and warmed up. what could be the problem ?

×

Ad

1 Answer

Anonymous

  • Level 1:

    An expert who has achieved level 1.
    Corporal:

    An expert that has over 10 points.
    Mayor:

    An expert whose answer got voted for 2 times.
    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 19 Answers

As far as the transmit frequency changing while you have the mic keyed this is normal, the transmit frequency is a little different than the receive, as far as the lost channels go you need to check the galaxy website and check to see if thier is any fixes listed. if none is listed then you can send the tech's a e-mail and tell them your problem and they will advise you on what to do.

Posted on Aug 15, 2007

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Can you expand the freq. range of the cobra 25 CB 40 channel radio
Yes its possible to do with the EXPO kits.. or an eeprom. but beware of the FCC rules please. RX purposes' only not to be used for Transmiting..

May 05, 2013 | Cobra 25 LTD 40-Channel CB Radio

1 Answer

Galaxcy DX 66v freq counter and radio slide up and down 3-5 clicks. Not all the time. Nothing I do seems to help
set your mode for AM with frequency counter reading 26.965 mhz on band E. ( channel 1 ) Now you have to adjust VR 1 for 26.965 mhz if its not reading it already . Now set the counter and the radio to 27.405 mhz ( channel 40 ) check for 27.405 mhz . If its off by .003 to .005 thats really nothing but if its off by .3 to .5 thats when it really off frequency .

Apr 20, 2012 | Galaxy Radios DX-66V Base CB Radio

2 Answers

Purchased a midland 75 785 from u s will it work on u k channels
  • For 11 meter (CB) the standard 40 channels will be the exactly same as the "EU" set of frequencies (channels). However the "UK" 11 meter (40 channels) and the U.S.A. 40 11 meter (40channels CB) will not work together at all. This includes any actual Citizen Band radio, excluding Export 10 an 12 meter radios often labeled as "CB'S" which they are not.

  • Hope this helps.

Oct 29, 2011 | Midland 75-822 40-Channels Handheld CB...

2 Answers

Midland 75 785 purchase from us will it work on uk channels
  • For 11 meter (CB) the standard 40 channels will be the exactly same as the "EU" set of frequencies (channels). However the "UK" 11 meter (40 channels) and the U.S.A. 40 11 meter (40channels CB) will not work together at all. This includes any actual Citizen Band radio, excluding Export 10 an 12 meter radios often labeled as "CB'S" which they are not.

  • Hope this helps.

Oct 29, 2011 | Midland 75-785 Handheld CB Radio

1 Answer

I have purchase a midland 75785 cb isit compatable with uk chanels
  • For 11 meter (CB) the standard 40 channels will be the exactly same as the "EU" set of frequencies (channels). However the "UK" 11 meter (40 channels) and the U.S.A. 40 11 meter (40channels CB) will not work together at all. This includes any actual Citizen Band radio, excluding Export 10 an 12 meter radios often labeled as "CB'S" which they are not.

  • Hope this helps.

Oct 29, 2011 | Midland 1001Z 40-Channels Base CB Radio

1 Answer

On my radio I need the settings for the knobs because other people can hear me but I only get static and cannot hear them. Thanks
Band should be E Band high/low button on high 10 khz off AM selected
To check that you have done this correctly frequency counter will read 27.185 plus or minus 5 khz. This is of course proved you have a radio that is converted for 11 meter cb frequencies.

http://www.cbtricks.com/radios/galaxy/dx88hl/index.htm Frequency Conversion is the channel expansion mod/conversion

Sep 16, 2011 | Galaxy Radios DX- 88HL Base CB Radio

1 Answer

What are the buts & nubs go to make the cb work which ones trun or push ?
Assuming you're talking about the Galaxy DX88HL, and assuming the mad has been done to reach the 11 meter band, you press the band button in, that put's you to the E-H banks, select the E/A bank which is high bank E. with the frequency counter on, it should read 26.965 for channel 1. If it reads 26.975, then your +10KHz switch is on, turn it off. you'll then be properly set for 26.965 (ch.1) - 27.405 (ch.40). You also have 5 "hidden" frequencies, these are at ch. 3, 7, 11, 15 and 19. To get to the "hidden" frequencies, go to any of the channels listed and turn on your 10KHz switch. Those frequencies are not attainable on radios that do not have a +10KHz switch or a clarifier capable of sliding that far over. To do repairs and for a full list of schematics, diagrams and so forth, I suggest this site, it has the most coverage of the Galaxy DX88HL as well as other galaxies that I've been able to find. http://www.cbtricks.com/radios/galaxy/dx88hl/index.htm .

May 25, 2011 | Galaxy Radios DX- 88HL Base CB Radio

1 Answer

LOST MY MANUAL TO MY UNIDEN BEARCAT BC142XL CAN I GET A FREE REPLACEMENT
The manual isn't online to my knowledge however I did find a guide on how to program it.
"Turn it on. Push the "MANUAL" button to stop it from scanning.

Push number 1, then push "MANUAL" again. This should leave you on
channel one.

Using the keypad enter the frequency you want to monitor, then push
"E." Press "REVIEW" at anytime to see what frequency is programmed
there. If the review button flashes 000.0000 on the LED readout
display, you might be entering an invalid frequency. Refer to the list
of acceptable frequencies in the Frequency Range Bands below.

Push "MANUAL" to step to channel number two. Enter the frequency. Push
"E." Push "MANUAL" to step to channel three. Repeat this process until
all the (10) channels are full, or you've run out of frequencies to
enter.

Push "SCAN" to start automatically scanning the frequencies. The
radio will stop when it hears someone talking, and resume scanning two
seconds after the conversation has stopped.

Frequency Range Bands:

20 to 29.7 MHz (10 Meter "Ham" Band)
29.7 to 50 MHz (VHF Low Band)
50 to 54 MHz (6 Meter Amateur Band)
136 to 144 MHz (Military Land Mobile)
144 to 148 MHz (2 Meter "Ham" Band)
406 to 420 MHz (Federal Government Land Mobile)
420 to 450 MHz (70cm "Ham" Band)
450 to 470 MHz (UHF Standard Band)
470 to 512 MHz (UHF "T" Band)"
http://newsgroups.derkeiler.com/Archive/Rec/rec.radio.scanner/2006-01/msg00174.html
Hope this helps.

Apr 22, 2011 | Office Equipment & Supplies

1 Answer

I need to know what frequency I'm on from one band to the nnext for instance channel 12 am what band and what frequency is showing
on the cb band (11 meters ) 27.105 is channel 12

Feb 20, 2011 | Galaxy Radios DX-2517 CB Radio

1 Answer

Just buying magnum s9 radio can it be used on 11 metre band or has it got to be modified for 26-27 cept channels as i think its just a 10 metre radio please advise many thanks.
Hey,
The magnum S9 is factory set for the 10 Meter band but can be "tweaked" to get up into the 11 meter band...
check out this neat and easy mod:
http://www.radiomods.co.nz/magnums9mod.html

Hope this helps!,ben

Jan 13, 2011 | Magnum S9 Base CB Radio

Not finding what you are looking for?

View Most Popular

DX-66V Base CB Radio

  • Radio Communications

Related Question

Can you expand the freq. range of the cobra 25 CB 40 channel radio

  • Cobra 25 LTD 40-Channel CB Radio

Open Questions:

0 Answers

my 66 galaxy works good bit u have to turn dimmer to twelve oclock to get it to go freguency which the channel we run 13 am band 27.1150. the rf power is not nurnering up and down i think these problems are related. we are technical enough to do the work would just like to have expert opinion thanks wiggie and snake eyes

Aug 15, 2011 | Galaxy Radios DX-66V Base CB Radio

Related Topics

Galaxy Radios DX-66V Base CB Radio Logo

Related Topics:

272 views

Ask a Question

Usually answered in minutes!

Popular Questions

2 Answers
How to adjust frequency on transmit??? Galaxy

Galaxy Radios DX-949...

4 Answers
Kl 203 rm italy linear amp transmitt

Galaxy Radios DX-959...

5 Answers
I have a Galaxy DX 33 HP CB radio, but i have

Galaxy Radios DX-33HML...

2 Answers
I have a Galaxy DX44V

Galaxy Radios DX-44V...

3 Answers
RCI 2980 power adjust problem

Galaxy Radios DX-2517 CB Radio

Top Galaxy Radios Radio Communications Experts

Brad Brown

Level 3 Expert

18626 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

Are you a Galaxy Radios Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

PDF Manual
Manual. user-manual-DX-66V Base CB...

DX-66V Base CB Radio

Loading...