Buttons do not work on the front/outside of the machine.
Remote still works, but nothing manual.
Tried "rebooting" by unplugging for 2 or 3 minutes and nope, still don't work.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
infrared board may have a fault. its in the front part on the board with the buttons. the infrared receiver may be going or gone it looks like a square led. that picks up the signal light from the remote.
hi. CL normally means the child lock is active. look for a lock symbol, either next to a button, or in the middle of a line connecting 2 buttons on the front of your machine. press and hold the button(s) for five-10 seconds until the CL goes off. hope this helps
Problems Player won’t work (locks up) •
Try unplugging the AC power cord and plugging it back in. •
Reset the DVD/VCR: on the front of the unit, press and hold the STANDBY/ON
button while you press and hold the STOP button—wait at least 3 seconds before
you release both of the buttons. You’ll need to set up your menu preferences
because this Reset Procedure returns the DVD/VCR’s menus to the factory default settings and also erases the
contents of the Disc Library.
Sounds like the front panel buttons are your trouble,you can disconnect these buttons from the rear of the set ,unplug the set and remove the back cover,just below the top screws you removed you can look under and see the top of the tubes,in front of the middle tube is a small board,unplug the right top cable and this will restore the set,just the front buttons will not work,use the remote