Manual make a password

According to the manual listed below you can :
(1) Enter the OSD menu.
(2) To execute "Reset" function.
This resets all the user settings to default.

Press "Play" to change the "Administrator Password".
The factory default of "Administrator Password" is "1234".

Service Manual link
Download manual

1. Without opening the cabinet, you can start the computer, and enter the current password.
Then, you can change the password.

2. From the manufacturer's web-site: http://www.acer.ca/acer/service.do

Select Driver Download
Select Server
Select Altos
Select G700
Select "User Manual Acer User Manual 1.0 14.8 MB 2009/01/16"

the password

You need to use "oxygen" as the password, this is the master reset password.

Thank you for using FixYa

Enter admin as the username, enter your admin password, and click the OK button. (The default password is
password.) Here is a link to your manual:

http://www.wedophones.com/Manuals/Adtran/NetVanta%202000%20Series%20Quick%20Start%20Guide%20(Rev%20B)%202nd%20gen.pdf

Tv made for Australia. Cool
More like the master password found in the owner's manual.
The password is 962326

You can get the manual here:
http://www.sanyo.com.au/support/instruction-manuals/lcd-32xr1-instruction-manual

According to the user manual, the device needs to be sent in. The user manual can be found at:

http://www.edimax.com/images/Image/manual/KVM/EK-08-16RO/EK-08_16RO_M.pdf

• Note: If you are not familiar with the operation of OSD menu, please don’t change the password – i.e. keep default eight zero (00000000) value.
• Otherwise, if you have set the password and unfortunately forget the password, you need send it back to your distributor for resetting the password.

dont know about the password but manual is here