How to solve error 6C10 - Canon Pixma Mg5250 Imageclass Inkjet Scan Copy 9600 X 2400 Dpi Sc

Go to the Canon homepage, go to error messages, query that specific error.

Double check that the error isn't 6C10. I also thought I had an 8C10 error also and that's how I found your unanswered question! But I couldn't find any other internet reference to 8C10 but I did find a YouTube fix for a 6C10 error message. So I got my reading glasses and looked again. Sure enough it was a 6C10 error! I followed the instructions for the 6C10 error fix (resetting Ink Absorber Reset) and my printer is now functioning. Bonus note: My printer is a MP620 and the reset was for a MP550. Same error number though! and also same solution. By now your printer has probably crossed that printer rainbow bridge... but hopefully someone else will need your help? With my reset, I am going to run my $$$ ink cartridges out instead of maintenancing the absorber and then toss mine as well!

6C10 means you need to replace the ink absorber. After this it require to reset the error. Reset 6C10

This WEB site gives a solution to your problem.
http://fix-your-printer.blogspot.com.au/2011/06/how-to-fix-error-6c10-on-canon-printers.html

My printer IP4840 have an error 6C10 how do l solve this

There's a registry scan/repair tool at http://www.error-scan-tools.com/error.php?t=610 that should solve this problem.

Hi, I solved this by doing a "cleaning roller" (dont know the right word in english) from the settings -> maintenance menu of the MP640. Good luck!

You have a "Valve Cam sensor error". Usually caused by paper debris inside the printer, probably near the purge unit.

Have a ggod look inside and see if you can see any bits of paper.