An expert who has achieved level 2 by getting 100 points
An expert that got 5 achievements.
An expert who has written 50 answers of more than 400 characters.
An expert who has written 20 answers of more than 400 characters.
Place camcorder in a room with heater on for about 2 hours not by heater this will dry sensor if this still happens contact sony and they will tell you it will need repair so get it repaired.
it's like a video recorder you need to leave in a room at room temprature before it will work.
hope this will help
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
This can be due to few issue and what could be checked by you is to look if the cassette is properly loading. Check if there is any objects blocking within the carriage. Also if the cassette hass any issues, try with another one.
Next check if the set is having condensation and so gives out the error message of a protect. So use a hair dryer into the cassette compartment and into the drum section.
Finally a fault in the servo or the loading can issue a fault condition.
This is usually caused by a failed component in the moisture detection circuitry within the camera and can usually be repaired fairly inexpensively. However, it's not a user serviceable problem and will need to be repaired qualified service technician.
My name is Rick and I'm a professional repair technician with over 20 years in the business and have repaired many of these. I
No knowing how old or condition of your equipment is ... its hard to suggest a solution. But the dew sensor of sony equipment tends to get dirty very quickly ... needs to be clean with a q-tip & alcohol every couple of years.
possible pinch roller problem.The pinch roller rubs against the capstan motor to pull out of the cassette .This pinch roller seems to fall completely or loose causing the error.The other possiblity is that the capstan motor is not turning ..might need repair..