Microsoft Xbox 360 Console Logo
Anonymous Posted on May 17, 2013

Why won't anything work?

My left 4 dead was burned when my mother decided to flip and ripped the console out of the wall. without destroying the console or wires and only the top came off when she threw it. I went to play with my friends on my left 4 dead and it wouldn\'t play at all! I tried and tried to fix it but it wouldn\'t work! I want to play with my friends again, Please help!

1 Answer

Ed Bowker

Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Corporal:

An expert that has over 10 points.

Mayor:

An expert whose answer got voted for 2 times.

  • Contributor 17 Answers
  • Posted on May 17, 2013
Ed Bowker
Contributor
Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Corporal:

An expert that has over 10 points.

Mayor:

An expert whose answer got voted for 2 times.

Joined: May 17, 2013
Answers
17
Questions
1
Helped
4300
Points
36

Some game systems have power fail protection. My WII needs to have both ends of the power cord unplugged for like 2 min to reset the power supply. Maybe this is your problem>

Testimonial: "It didnt work but thanks for trying to help "

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer
0helpful
1answer

No compression

A car won't start without compression.
Request the compression numbers from him, if he hesitates he's probably trying to rip you off.

Randomly not starting could be a half dead fuel pump or just a loose connection under the hood causing sporadic spark to the plugs.
0helpful
1answer

I can't get the controller to work. The light will come on, but the buttons won't respond. I've tried all 3 usb hubs with the computer plugged into the wall, made sure everything is plugged in,...

Hi there.
Have you gone to the Logitech website, to get the installation file?
Some gamepads require them, since windows only has generic drivers, and some functions won't work until you do ie:rumble support
Hope that helps

Cheers
0helpful
1answer

I want to play duplicate dvds on my ps2 but i am not able to do what should i do can i do it at home

  1. If you have backed up a game for ps2, you're going to need a mod chip or swap magic for your ps2 so it can read the disc, so first things first, BUY A MODIFICATION TOOL!!!
  2. 2You should try using Swap Magic, because it's the easiest, and you won't need to modify your PlayStation too much.
  3. 3But if you use SWAP MAGIC, you will also need a special mod chip, SLIDE TOOL, or a FLIP TOP COVER, you can learn more about those on the swapmagic website
  4. 4Read directions on the installation of mod chip, and swap magic before you do anything (you don't want to mess up, or else your ps2 won't work properly).
  5. 5Install your modchip/flip top cover/slide tool. (This is important, because it allows the disc to be removed and "swapped" without the PlayStation knowing).
  6. 6Follow directions that came with your swap magic discs, and you're basically ready to go!
  7. 7HOW TO USE SWAP MAGIC,Note you must have Swap magic 3.6 to boot on slimline ps2 and you need to do a none solder modding(no soldering)

Purchase a flip top (recommended). Let's assume you have the flip top and a copied ps2 game
  1. 1Now Insert the swap magic disc into the ps2,
  2. 2Press power on button until screens comes up.
    • With option that says load cd open the top cover of the flip top.
    • And take out the cd when it stops spinning.
  3. 3Now insert your Copied game and click Load CD.
  4. 4its that easy
0helpful
1answer

Sony Handycam DCR-HC32, won't turn on, even when plugged into the wall outlet and with a new battery or no battery at all. Last week it worked but I couldn't use the flip viewer, only the eyepiece...

This is usually caused by a failed component in the power circuit within the camera and can usually be repaired fairly inexpensively. However, it's not a user serviceable problem and will need to be repaired qualified service technician.


My name is Rick and I'm a professional repair technician with over 20 years in the business and have repaired many of these. I'm semi retired and work from home with little overhead so I can keep repair costs low. If you decide to have the camera repaired, please click HERE for a directory listing that suits your needs.


If this response has been of any help to you, please be sure and give a positive vote for me on FixYa.com .

0helpful
1answer

My xbox 360 wont read anything

i have had this before and what you should do is take the game out get it buffed for like 5$ and if it still doesnt work sell it and buy another left 4 dead if it doesnt work im sorry
Not finding what you are looking for?

115 views

Ask a Question

Usually answered in minutes!

Top Microsoft Video Game Consoles & Games Experts

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Brad Brown

Level 3 Expert

19187 Answers

ELECTRICKSUSA
ELECTRICKSUSA

Level 2 Expert

282 Answers

Are you a Microsoft Video Game Console and Game Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...