Re setting Samsung WEP200

Is this Blackberry a corporate Blackberry, there may be some corporate policy blocking bluetooth connection. Check with your company IT support.

Are you able to discover and connect to other Bluetooth devices?

To put the WEP200 into pairing mode, the user must ensure the headset is off then press and hold the multi-function button for eight seconds, or until the LED glows a steady blue. Samsung uses the standard "0000" as the pairing code for the device.

Hope this helps

Hi,

Did you try deleting all devices paired and then try pairing again?

Hi,the BlackBerry Pearl is a versatile mobile phone. It's primarily a Smartphone that's suitable for business use but it's also equipped with some decent entertainment features. The pearl can also play music files which you can enjoy with the help of a hands free Bluetooth headset. Let me teach you how to pair a Blackberry Pearl Smartphone to a Bluetooth headset.


Things You'll Need:

* Blackberry Pearl Smartphone
* Bluetooth headset

Turn on your Bluetooth headset by pressing and holding the multifunction button.


Check if the LED light is a solid blue. Turn off the headset and repeat the first step if the light is blinking.


Activate the Bluetooth wireless connection on your BlackBerry Pearl by Going into your "Settings" menu

Select the "Options" menu to go to your connectivity settings

Click on the "Bluetooth" option to activate the connection


Choose the "Add Device" option on your BlackBerry Pearl to locate the headset


Wait for a while as your Smartphone locates the Bluetooth headset


Enter 0000 for the password after selecting the headset to complete the Bluetooth pairing process


After that, your Done !!!!you can now send and receive. But after following this instruction and no solution yet, that means there is something wrong with your blue tooth. Corrupted. You will need to reset the phone.

Your phone MUST have the bluetooth on and discoverable. When it is press and hold the power button on the WEP200 until the light turns on steady should be 5 to 10 seconds. With this done, use your blackberry to search for a new device, should be in the bluetooth menu. It should find the headset. Your phone will ask for a password enter "0000" (four zeros) then press pair or enter. It will take a few seconds to connect. Your phone will automatically connect to this headset when you power it on. Don't forget to turn the phone back to un-discoverable when done. I hope this helps.

Use passcode 0000

http://www.alternativewireless.com/samsung/Samsung-WEP200G-quickstart.pdf

Make sure you do as it says on the pairing section. i was having the same problem (no devices found) until i followed as it said on #2, when wep200 is off press the multi-function key until the blue light comes on solid approximately 8 secs. I have a samsung instinct and it read just fine after that.

when searching device bluetooth
press and hold power button down on bluetooth this will sync the bt. up then put in the code 0000 for the pin it asks for

On my blackberry I have to turn bluetooth on. Then on the WEP 200 hold down the button untill you hear a series of beeps. The light should blink every so often once its on. Then go to bluetooth options and search for devices.

i found out that if you turn the bluetooth off and then turn it back, while turning it back on hold it until solid blue light and then try 2 connect with your blackberry i jus got mine and threw my instructions out. and i did this and it worked and if it should ask for a passcode i used 0000.