Need to add printer epson stylus cx6000 to my computer

Hi Chris,
Thanks for contacting FixYa.

If you do not have the installation disc, you can download the software from manufacturer's support website by clicking this link
On the page which opens, select the operating system of your computer from the drop-down menu.
Then download and install the required drivers and software.
Please note: The list of available software and drivers will load only after selecting the operating system of the computer.
Hope this solves your problem. Thanks again.

you probably need to re-install your printer software pop your intall cd in and follow the prompts to install your printer
or go to epson.com
http://www.epson.ca/cgi-bin/ceStore/support/supDetail.jsp?BV_UseBVCookie=yes&oid=72303&infoType=Overview

Go to epson.com and download from there. I had to the same thing because i lost the book.

Go to epson website to download the driver for your printer.

http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?oid=72303&prodoid=63059192&infoType=Downloads&platform=Windows

2nd link down is the Windows 64 bit driver.

You can get all the free software you need for your printer from this Epson website http://www.epson.co.uk/Printers-and-All-In-Ones/Inkjet/Epson-Stylus-CX3600/Drivers-Support?supportLandingPage=true

Please dont forget to rate me ........... thanks from Scott

Hi mackaype

Here is the link for a free download
Choose the correct operating system and download driver
Then install the driver
http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?sku=C11C657001
hope this work for you
Cheers
luciana44

Take this link to Epson website and select your download.

http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?BV_UseBVCookie=yes&oid=72303&infoType=Overview

go to epsons website, download the driver to print ie the pcl 5 or 6 driver and you may have to extract it or it will be a setup file you can run and add the printer and then connect the usb cable for the printer either when it prompts you or after you have installed the driver.
To do this go to printers and faxes --> add a printer and go from there if the setup file does not work.

The easiest way to install without the disc is to go to Epson.com & under the support section download the software/drivers for your printer & the operating system you are using. Once downloaded open & run the setup. The onscreen directions will talk you through the rest of the installation. Hope this helps & please remember to rate my answer. Thanks.