After 10 min. of play time the dvd stops working

The dvd disks you're playing.... are they homemade or factory made recordings?

Players often when the optical pickup in them is either dirty or beginning to fail will first have problems with blu rays because of technical standards are much more refined for the blu rays.

The problem is in the laser pickup assembly, the stepper motor that moves the laser is sticking on the worm gear or excessive ware on the gear linkage is preventing it from moving.

Troubleshooting Solution

1. Lift disk changer doesn't work comes message "Disk Error"
2. Lift disk changer work fine but doesn't load a DVD
3. Power light is ON but doesn't want to Power UP
4. From the beginning start DVD movie the picture distorted and freeze

available parts avsystemparts.com

1. Possible Problem w/ Main Board PCB

2. The dive laser assy replace. or full complete 5 Disk changer ROM
3.More chance problem w/ Main Board

4. Problem w/Main board need replace it.

Your dvd drive needs cleaning of its lens. just open it and clean it with a soft cotton .
The problem will get rectified.

when it happens, give it some time, like 5-10 min. the ps3 is most likely accessing the hard drive, and if it is, shutting down in the middle of it could currupt your hdd. if it doesnt work, even after 10 min, call sony tech support, but if it works fine afterwords, i dont see why it would be neccessary. unless it gets worse, i think you should just turn it on, turn it off after a few min, then back on, and then play.

i hope ,too.if its only months since you bought that ,avail of the warranty package that comes with it.

the lens on laser needs cleaning manually never use disc cleaners ever

First of all,if you are using rental dvds, there might be scratch which your dvd player might have an issue to read it;however,if you have tried many dvds in this player and you are having this issue, it is time to move on to another dvd player.
I recommend a Pioneer dvd player.
solutiondoct

You need to open its cover and remove all flexible cables one by one and refix again. it probably has some clogg in connectors. pay attnetion to flexible cables as these are very delicated.