The belt from the drive motor stretched and I need to replace it. I removed the top plate and removed the 2 screws holding the right side plate. However, I can't remove the right side plate because the hand wheel is holding it back. Does any one know how to replace the belt in the 1703?
SOURCE: kenmore sewing machine mod 1703 motor runs but
By 'The wheel the belt is on' you mean the motor pully? If that is so obviously some oil has some how made way on the pully and the belt. Try to remove the belt and clean both wheels and the belt free of oil. This shd slove the problem.
If it doest then please send a photo of the arrangement showing pully and belt. U didnt mention if the machine is old or new. Did u oil it recently before trouble developed?
167 views
Usually answered in minutes!
×