Question about Sharp 32C-240 32" TV

1 Answer

Sharp 34" TV

TV was working fine this morning, then all of a sudden it switched itself to standby and will not switch on with the remote and if i switch is off at the button and then back on again, the red standby light comes on but it wont "fire up" inside the set - Is it worth repairing as its about 4 years old

Posted by stockings on

  • tanny Nov 10, 2007

    Hi. I have a SHARP 29" TV (model : SX-68E9) and it has similar problem. Recently it switches off to STAND-BY every about 25mins of usage. It is very consistent at about 20-25mins of usage only and it went into STANY-BY mode. I tried using reote to switch on or turn the Push Button off and on but still on Standby mode. After waiting for say 10 -15mins or so I could turn on again. The cycle repeats itself. This TV is not so old but about 8 yrs. I did check all function and timer nothing was being set and no timer or lock was activated. Everything was normal. Anyone has advise if this is a serious proble of just something minor. Thanks.

×

Ad

1 Answer

Anonymous

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 18 Answers

Why shouldn't it be worth fixing? It's only 4 years old, my own TV is 15yo, I fixed it twice but it's still kick'n! You have a problem in the power supply, do you have electronic's know how? And test equipment? Soldering equipment? If so we could walk you through it, If not A repair man should only cost 80 to 100 to fix it.

Posted on Aug 16, 2007

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My remote control for my Pro View TV suddenly quit working. Is it fixable or, if not, how can I get a new one?


The replacement batteries could be defective or installed incorrectly. If the remote cannot be revived, you can search online for several providers of replacement OEM remotes.

Feb 28, 2015 | Televison & Video

1 Answer

Tv won't turn on- its in standby mode. the young lad had the remote before it was turned on.... could he have pressed somethin on the remote which is now preventing it from coming on?


Powering up do you hear the relay click then you may see the display flash (not necessarily), but then the TV clicks back into standby mode. If so there is a component failure.
will need diagnosis by a repair shop. Too many different components it could be for me to guess. but
the common repair kit containes1 fuse (F302), 1 diode (D304), the power resistors (R927 and R929 for the board revisions with these two resistors) and the IC301 voltage regulator IC.

Feb 21, 2018 | LG 50PJ350 50 in HD-Ready TV

1 Answer

Power is on in standby, but takes several times pushing the power button for the power or tv to actually come on


Very bad for the TV, don't do this!
Got the remote control? Switch on or off (full operation) from Standby with it and just use the main manual switch on the TV for, say, morning ON for the day and evening OFF for the night.

Sep 21, 2011 | Soyo Crystal DYLT032B 32 in. LCD...

1 Answer

LG 32LH2000 My TV was turned of last night in the usual way, the power turned off on the remote control, then the power supply switched off and the plug removed. This morning I attached the power...


most LG have a "vacation switch" on the bottom right hand side of the set very near that standby light.

it is placed poorly, where you can accidently click when grabbing the TV to move it or swivel it.

it is a toggle switch, a "master power" switch.

you may have bumped it to the off position. flip the switch, your standby light will come back on.

Apr 16, 2011 | LG 32LH20 32 in. LCD HDTV

1 Answer

Acoustic Solutions TV Fault


I think you are looking at a power board problem. I had the same thing happen to a Vizio and I replaced the power board and it solved the problem. It could also be the input board but most likely the power board.

Thanks,
Ced

Jul 13, 2009 | Daewoo DLP3212 32 in. LCD Television

1 Answer

TV suddenly stopped working - won't switch on from top - won't respond to remote - no standby light - fuse is fine - set is 3 yrs old


The Power Supply is probably causing the problem if you are not getting any response or LED flash or Stand by

Jul 03, 2009 | Sony BRAVIA KDL-40S2010 40 in. LCD...

1 Answer

TV keeps turning itself on and off, onto standby


I managed to find a local repair man who fixed the problem. He put in a new transformer.

Dec 01, 2008 | JVC AV-32D305 32" TV

1 Answer

TV Switches itself back to standby mode continuously


if your remote is ok then this is due to power supply failure in your tv. either it is loose in oscillator ckt in switching section or it has failed. if not tech person call tech to fix it. not a major problem.

Oct 07, 2007 | Televison & Video

1 Answer

TV keeps turning itself on and off, onto standby


Right i had this same problem for ages! i cannot explain why but when i uplugged my DVD player (which was flashing its light at the same time as the tv for some reason) the TV has worked fine.

Aug 24, 2006 | Philips TV Tuner Video Capture PCI Card -...

Not finding what you are looking for?
Sharp 32C-240 32" TV Logo

Related Topics:

256 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sharp Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76287 Answers

Cindy Wells

Level 3 Expert

6082 Answers

Ekse

Level 3 Expert

13434 Answers

Are you a Sharp Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...