Epson c43sx red ligh on

My printer does not print.
i used SSC service utility
it says printer off or some other problem.
what should i do

Jams - you should not come into an existing question your problem could be missed that way. However- What you have us an indicator that thew waste ink tank is getting full. Download the following utitlity www.ssclg.com. You can also reset on the buttons of the printer How you do that is listed on www.fixyourownprinter.com and then enter your printer model number and check the forum.

Please go to my website http://www.the-inkstore.co.uk . I have the latest version of SSC Service Utility to download directly onto your computer and instructions on how to use it, what to click on etc etc. Click any of the Epson links if you can't find it, everything you need to know will be there, including printer Firmware resetting which sorts out a multitude of problems.

The 'maintenance required' problem with Epson printers has absolutely nothing to do with which cartridges you are using, it is a built in page counter in your printer firmware, which has a different maximum amount for each Epson model. Don't listen to old wives tales and heresay, we are the experts and it's an Epson scam to cause a lot of people to pay for maintenance or throw their printers away.
I haven't found a model that can't be reset with the latest version of SSC Serve or the manual reset on my site.

For Epson RX500 users there is also a manual reset on my site, as the SSC Serve software won't do it for you.
When using the program & choosing your printer from the list, it may have a weird name with 'x' in the model number, this is because some configurations are for many models in a series. For example, the C46 will be listed as C4x as it is for the C42, C44 & C46 models.

I hope this helps all Epson users to overcome the Epson scam of page counting and locking out until you pay their dealers money for maintenance.

If you like what I've done for Epson users, please show your appreciation by spreading the word and perhaps buying your ink from my site.

Happy trouble free printing

The INK Store (UK & Europe)

Below I have posted a copy of the error indications. Most likely that something is stuck in the paper feed path. Try pushing a thick piece of card (A5 size) backwards through the paper path from the exit rollers. Be careful of the right side where the paper flag is located.