Question about Evesham Nav-Cam 7700 GPS Receiver
Make sure that the on switch on the bottom is on(this is the switch you need a pen to move, not the reset button, but an actual switch that doesn't have a spring if you know what i mean). This confused someone I know with this model, that it has two on switches!
Now we'll try to resetting procedure:
1) I believe you switch the unit OFF with that switch on the botton (the one that needs the pen).
2) Now hold the power button on the top with your finger, and switch that switch on the bottom back to ON while keeping your finger held down on that button.
3) Something roughly called the Aragorn Boot Loader will appear and will count down from 5.
4) Release your finger off the power button on the top before it reaches 0 or you will have to start again.
This should have performed a hard reset, and you should be asked to calibrate the touchscreen.
If this does not work or you cannot even get the arragorn boot loader screen then that might suggest a hardware issue of the battery only being connected to the charging circuit and not the device own circuitry.
Posted on Nov 16, 2007
Hold the on button for some time or touch the screen if it is a touchscreen GPS.try plugging everything in that came with it like the recicver
Posted on Aug 12, 2007
at the bottom of the unit there is a tiny little black button press this in with a pin or needle and it should reset itself
Posted on Jan 14, 2009
SOURCE: sat nav probelm
Evesham is no longer in business but the following url is for a company that supports their products..
http://www.tewktech.com/
As a matter of fact, I understand this company has ex-Evesham employees. Good Luck and please rate this solution
Posted on Mar 27, 2009
SOURCE: need to update my nav cam 6200
Evesham is no longer in business but the following url is for a company that supports their products..
http://www.tewktech.com/
As a matter of fact, I understand this company has ex-Evesham employees. Good Luck and please rate this solution.....
Posted on Mar 27, 2009
SOURCE: nav cam 6200 evesham
Evesham is no longer in business but the following url is for a company that supports their products..
http://www.tewktech.com/
As a matter of fact, I understand this company has ex-Evesham employees. Good Luck and please rate this solution
Posted on Mar 28, 2009
SOURCE: Map Update for the Evesham Nav-Cam 6200
Evesham is no longer in business but the following url is for a company that supports their products..
http://www.tewktech.com/
As a matter of fact, I understand this company has ex-Evesham employees. Good Luck and please rate this solution...
Posted on Apr 09, 2009
615 views
Usually answered in minutes!
my navcam will switch on, go onto the aragorn page with 5 seconds, but will not count down and just freezes, any suggestions?
correction, it will countdown but never gets to 0, when i remove my finger before 0 it freezes
×