Question about Canon EOS-1N RS 35mm SLR Camera

1 Answer

Film rolls back automaticaly

I have Canon 1NRS film camera but the film rolls back automatically at 18th frame ie rewinding the film on its own. I have new rechargable battereis.

Posted by stallion_000 on

Ad

1 Answer

old marine

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,346 Answers

The camera shouldn't be doing this, assuming you're using 36 exposure (or 24 exposure) film. You may want to set a custom function to prevent automatic rewind -- you would have to rewind the film yourself by pressing the rewind button.

To do this:
1. Under the palm grip, press the 'CF' (custom function) button.
2. Use the main dial to select 'F1' in the LCD. It should show a '0' below the 'F1'.
3. Press the 'CF' button to change the '0' to a '1'.
4. Press the shutter button half way to save the change and exit the custom function setting mode.

If you want to stop the rewind with the film leader still exposed (film doesn't rewind entirely into the cannister), use the same steps but set custom function 'F2' to a value of '1'.

Posted on Mar 17, 2009

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Film rewinds when loaded


Align film leader at mark, then close the camera back for prewind loading. Film rewinds as each shot is exposed. Built-in motor for automatic winding/rewinding. Film advance: Automatic. Single-frame and continuous (1 fps). Automatically rewinds film leader into cartridge when designated number of frames have been exposed (midroll rewind available).

sorce: http://www.canon.com/camera-museum/camera/film/data/1996-2000/1999_eos3000.html?p=2
Canon Camera Museum Camera Hall Film Cameras

good luck

Dec 20, 2014 | Canon EOS-AE-1 35mm SLR Camera

1 Answer

When I insert a new roll of film into my Canon Rebel S 35mm SLR, it automatically rewinds the film instead of winding it onto the spool. I can't figure out why it's doing this.


this is normal, as these cameras are designed to wind the entire film to the take up spool then as you expose the file will roll back into the cassette. this was a feature that canon devised to protect already exposed film when the back cover is inadvertantly opened.

Aug 17, 2013 | Canon EOS Rebel X 35mm SLR Camera

1 Answer

Is there a manual rewind on nikon n65?


If by manual you mean turning a crank to rewind the film, no. If you mean to do it at a point other than the end of the roll, yes.

To rewind film mid-roll, press the two film rewind buttons simultaneously for approximately one second. The film will then rewind and the frame counter will count backward. The film is completely rewound when the E appears in place of the frame number.

The two film rewind buttons are marked with a red film canister symbol with left-pointing arrows. One is the exposure compensation button next to the control panel, the other is the self-timer button next to the mode dial.

If you need a manual, you can download one from
http://butkus.org/chinon/nikon/nikon_n65/nikon_n65.htm

Jan 21, 2011 | Nikon N65 35mm SLR Camera

1 Answer

My Canon AE-1 Program will not rewind. I shot the whole roll, rewound a little, and then accidentally opened the back cover. The counter reset to S, and the rewind crank just unscrews when I try to...


I think you have already ruined the film except the frames that are rewind back to the film cartridge.
You can take the film out from the camera, push in the rewind button at the bottom, pull out the film from the film take up reel.
On the film cartridge, turn on the long tube in the middle clockwise to wind all the film back into the cartridge.
If you had the back opened briefly, do manual film rewinding in the dark room.

May 21, 2010 | Canon EOS-AE-1 35mm SLR Camera

1 Answer

My Canon EAS Film Rewind Knob is rolling my new film back into the cassette instead of into the camera...please help.


That's what the rewind knob is all about: It will allow you to rewind the film back into the cassette to avoid it to be exposed to the light and therefore losing your pictures.

When loading the film you must insert the film into the receiving spool by hand while the camera back is open. Make sure to advance the start enough so that the spool will 'stick' to the film.

Dec 19, 2009 | Canon EOS-AE-1 35mm SLR Camera

1 Answer

Why is the film automatically rewinding around 15 shots instead of the end of the 24 shot roll? The batteries are fresh.


the roll sensor is not reading the silver code on the film roll.
Open the camera when you have no film in it.
Clean the film roll slot where the "fingers" are.
These fingers touch the case of the film roll to determine the film type, which includes the number of exposures. You nmay have to "adjust" the fingers so that they make good contact with the film roll case.

Look at different rolls of film, notice the silver blocks are different. If the roll has a "dent" on it, it can't be sensed correctly.

Hope this helps!

Sep 15, 2009 | Canon Sure Shot Classic 120 35mm Point and...

1 Answer

I just bought a second hand Contax RX but the film rewinding stars automaticaly after 5 or 6 shots, even in a 36 exposures roll. Is it a set mistake? Thanks. Julio


The auto-rewind is triggered when the film advance mechanism detects tension on the film, indicating the end of the roll.

It could be a couple of things causing the problem...

1) The particular roll of film you were using was wound too tight, or has got some moisture in it causing it to stick.

2) If it has done this with various rolls of film, it is likely that the clutch mechanism that detects the film tension is out of adjustment. This is something that a professional camera repair shop will be about to fix for you.

I'm not familiar with this particular model of camera, but there may be a facility to turn off the auto-rewind as a short-term fix.

Hope this helps!

Jun 27, 2009 | Contax RX 35mm SLR Camera

1 Answer

Film loading


Rewinding button or option may be in action

Oct 27, 2007 | Canon EOS Rebel G 35mm SLR Camera

2 Answers

Camera Rewinds New Roll of Film


Check the camera and the manual to see if there is a control to override the auto rewind; it may be set to rewind. Other than that, check Mikon's website for support info.

Jun 16, 2007 | Nikon N55 35mm SLR Camera

1 Answer

The film automatically loads then rewinds when a new film canister is added


Hm. Well, the way this camera works is actually very clever. When you first load a film into it, it winds the entire film out of the cassette and into the camer. As each shot is taken, the film is rewound back into the film cassette. The advantage of this is that if the back of the camera is accidentally opened, the shots which have already been taken are already safely back in the film cassette and will not be damaged by the light ingress. However, your camera is behaving strangely. I would check that the electrical contacts where the film cassette goes in are clean. You can clean them using a cotton bud moistened with methylated spirits.

Apr 13, 2007 | Canon EOS Rebel G 35mm SLR Camera

Not finding what you are looking for?
Canon EOS-1N RS 35mm SLR Camera Logo

Related Topics:

217 views

Ask a Question

Usually answered in minutes!

Top Canon Photography Experts

old marine
old marine

Level 3 Expert

2346 Answers

Brad Brown

Level 3 Expert

18666 Answers

Jax Planet
Jax Planet

Level 2 Expert

923 Answers

Are you a Canon Photography Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...