KENWOOD TH-22AT WITH LOW VOICE

its illegal

TH-22AT/ TH-42AT QUICK START
1.Press VFO
2.Enter Frequency By
a)Using the dial knob
b)Or entering the last five digits of frequency

3.If Tone Is Required
a)Press T/CT
b)Press and hold F for more than one second
c)Press T/CT
d)Using dial knob select tone frequency
e)Press T/CT

4.Memory Entry
a)Press and hold F for more than one second
b)Select memory number using dial knob
c)Press MR to store

5.Memory Recall
a)Press MR
b)Select memory number using dial knob

I solved this problem once by opening the unit and adding a rubber spacer that exerts pressure on the ribbon cable. I cut the spacer myself from a neoprene-like spongy material. This fix worked for approximately 5 years. The problem is slowly re-emerging and I might have to do it again soon.

You should be able to enter the menus and change the freq display mode away from "alpha".

You apparently have combined my radio problem with someone else's problem with a humidity device or something. My problem with the radio was solved very nicely, and I have the receipt for the payment.

Go to qrz.net, qth.com or just type the radio model on search engine : "kenhood th 22at diagram" will bring you a lot of places.

RTFM Page 29

Press [BAND] + POWER ON to toggle Channel Display

Gerard - PE1OUD

http://www.radiomods.co.nz/kenwood/kenwoodth22.html

TRY TO RESET THE CPU.

REPLACE THE PTT SWITCH, AND ADJUST THE MODULATION TRIMMER.