Tv is pluged in,will not come on when on button is pushed

1. Unplug the TV overnight and then plug it back in and SOMETIMES it could work and fix your issue.
2. Unplug the TV and everything hooked to it, and then plugging it back in may clear the problem.
3. Make sure that the TV is set to the correct input.
4. If the TV screen still remains dark unplug your TV and push the power button for about one minute and then plug it back in. See if that resets your TV. If it still remains dark use a flashlight and angle it against the screen with the TV at a station where you can hear the sound See if you can make out shadows or shapes

Make sure there are batteries in the remote. Select the proper input on your tv. You should see a roku logo on the screen. Use the remote to power on the Roku box.

Sure the plug is getting power from wall outlet? If power is there you might want to check out the power supply board first for issues.

Well, there could a be few issues. First thing is to verify the breaker that gives power to that wall has not tripped off in the home's break power panel. If it is not tripped then verify the wall outlet that the TV is plugged into has a reset button, like a GFI (ground fault interrupt) If it does then verify that it has not tripped. If the GFI on the wall plug is tripped simply push the reset button back in and then try plugging in your TV power plug again. Then if that checks out or does not have a GFI outlet, verify that the power plug going into the back of the TV is not loose. Unplug and replug power plug that plugs into the back of the TV in and verify it is securely connected. Lastly, the power supply in the TV might have gone out.

The power supply in your TV is going bad which is why you have to unplug it and then plug it back in for it to power on. When the part fails completely, you won't be able to power the TV on at all.

In order to obtain the replacement part for that brand, you'll have to visit, www.akaiusa.com because they no longer have a phone number you can call for tech support or customer service. The company stopped making TVs in 2006.

I hope I've provided you useful assistance and that this information allows you to make an informed decision as to how to proceed from here. Please be sure to vote on my response. I hope I've earned a good rating from you today.

Please post a comment if you need additional assistance so that I can help you further.

I found out how to solve this problem...first power down your computer. Then take out the battery, remove the power supply, and then hold down the power button for 30 secs. Put the power supply in only (not the battery). Start your computer after everything is done loading up put the battery back in. Give it a min. and then you should be able to roll your cursor over the battery life indicator in the lower right corner of you computer and is should say charging. I have found that other people have had this problem and it has worked for myself and for them.

Unplug it from the wall, wait 2 minutes and plug it back in. if problem still exists, its probably the main pcb.

is it beeping or cherping ,cherping it the power supply trying to run.power supply poss.faulty

I am having problems turning on the tv. I had lost the remote control so I bought a universal remote which was not working at the time I unpluged the tv form the powersocket then I tryed to turn on the tv the green power light stays on for a few seconds then it blinks two times then there isn't a power light on after that what is wrong