Question about Audio Players & Recorders
How if the mic is working but DOES'NT connect from the reciever because the red light is not working
Posted on May 12, 2013
Testimonial: " @marly . am pretty sure both the transmitter capsule and reciever are working . my issue is how do I connect it so that the green ready lightnon the reciever turns on"
SOURCE: Is the frequency used by
It depends on the specific frequency that you have. Some of the UT systems operated between 698 and 806 MHz, and they are now illegal.
Other UT systems operated below 698 MHz and those are still legal to use.
Look at the frequency that is on the sticker on the back or bottom of the receiver or the sticker that is in the battery compartment of the microphone.
Posted on Dec 26, 2010
Sounds like a complicated issue. Many things could cause this symptom. Try calling Shure at 800-516-525 to see if they can help troubleshoot.
Posted on May 04, 2011
Tips for a great answer:
Usually answered in minutes!