I need a code for a universal remote

To program your Magnavox DVD VCR combo using the Magnavox CLO358 universal remote, you can try the following codes:

0503
0675
1153
1203
1321
Here's how you can program the remote:

Turn on your Magnavox DVD VCR combo manually.
Press and hold the "Code Search" button on the remote until the indicator light turns on.
Release the "Code Search" button.
Press and release the mode button for the device you want to program (in this case, the DVD VCR combo). The indicator light should remain on.
Enter one of the codes listed above using the numeric keypad on the remote. The indicator light should turn off after entering the code.
Aim the remote at the DVD VCR combo and press the "Power" button. If the device turns off, the code is correct. If not, repeat steps 4 to 6 with the next code on the list.
If none of the codes work, or if you have any other issues, it's recommended to consult the user manual of your Magnavox CLO358 universal remote for additional instructions and a complete list of codes.

Remote Control Support - RCA ' Made for Moments

www.rca.com/support-remotes

RCARemote Control Support. Select your Type of Remote. Remote Code Finder ...RemoteProgramming. Cable/Satellite Receiver Codes. Select Your Provider.

RCA Universal Remote Control- Target Programming ...

www.thompsontv.com/rcarc.html

RCA Universal Remote Control-Programming Codes. ... Universal Remote. The remotemay already be set up to operate your brand of TV, VCR, or Cable Box.

Program an RCA Universal Remote Without a "Code Search ...

www.wikihow.com > ... > TV and Home Audio > Television

wikiHowHow to Program an RCA Universal Remote Without a "Code Search" Button. Do you have an older RCA universal remote that you want to use, but it lacks a ...

Philips rca universal remote codes sayno vcr dvd combo ...

www.fixya.com > ... > Remote Controls

Universal Philips Magnavox remote for a Sanyodvd vcr combo ? I have a cableremote and need to program my Magnavox vcr/dvd combo into it i have 2 dvds ...

How to Reprogram a Philips Universal Remote Controller ...

science.opposingviews.com > Computers

have you tried ? 60000 60035 60039 60081 60593 61593 (VCR)

if the codes for the DVD didn't work ...

Universal remote does not work with Magnavox combo of dvd vcr, because no dubbing button. But magnavox has many remotes that will NB884, NB559, NB677.NB627 which also works on Sharp dvd vcr combo.

This DVD/VCR isn't compatible with the GE Universal remote. Sorry.

I would recommend contacting Magnavox (actually FUNAI CORP.) at www. magnavox.com, and seeing if they would be willing to send you a remote that was compatible with your player. There was another Magnavox player remote that also worked with Magnavox MWD2205. So it's possible that a number of remotes would work for you. Good luck! :)

code is 0247

0456 [0914 0286] [0969 0286] the codes in the boxes are as follows the first is for dvd the second is vcr

I need codes for my Universal Philips Magnavox remote for a Sanyodvd vcr combo ?