Question about Samsung PN42A450 Plasma TV

Open Question

Samsung ps42q96hd power settlement action reached

Won't turn on just clicks

Posted by Anonymous on

Ad

2 Related Answers

Anonymous

SOURCE: I have a Samsung 42 " Plasma Model no: PS42Q96HD.

Hi, this could be a problem with the power supply in the tv, it is common especially on some Samsungs and specific repair kits are available quite cheaply if you have good soldering skills.

Usually this is caused by capacitors that have dried up and split, you can normally tell as the capacitors are bulging on the pcb, you can get them in a kit as I said eBay sometimes do them or you can buy them indivually from a good electronics components supplier, make sure you get the correct values for each!! marked on the side of the capacitors in xx/x V, xxx/x uF and 105oC. (the x's represent numbers)

The picture below shows the type of theing that happens, the brown ones are bulging/split on the top whereas the black one is fine.

midgefive_0.jpg

High Voltages can exist in these sets, never attempt anything while plugged in and
if in doubt do not attempt it yourself and seek the advice of a qualified TV Technician.

Posted on Feb 10, 2011

Ad
SD Tech

SD Tech

  • 14553 Answers

SOURCE: my samsung tv is making clicking noises and won't turn on

Clicking noises may mean a power supply voltage is not staying correct or that board is bad---a suggestion: visit shopjimmy.com who has by model number a list of all the boards used in almost every Samsung Flat screen set made.

Posted on Jun 17, 2012

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

97 Nissan 200sx turns over but won't start.


check coils, plugs, clogged throttle body, vaccume leaks, or anything else that would enable from starting.

Mar 30, 2013 | Cars & Trucks

1 Answer

I have a 2000 Ford Taurus. My wife left the radio running with the ignition off for a short while. Now the car won't turn over, won't start, won't jump. There is one click when trying to s


The click you are hearing is most likely the start slenoid making contact, however you should short the large wires @ the solenoid to make certain the starter still doesn't run, if so try tapping the starter with a hammer to shift the comutator a litle and try to start. Even if it now starts the starter will continue to give you problems so the proper fix is change the starter

Sep 22, 2012 | 2000 Ford Taurus

1 Answer

Phillis won't turn just clicks


Hello, what exactly is clicking on the tv and won't turn?
[email protected]

Oct 02, 2011 | Philips 50PFP5332D 50 in. Plasma...

1 Answer

1995 geo tracker won't start. I've replaced everything except the ignition switch. It used to click when i turn the key, now it won't even click.


DISCONNECT YOUR BATTERY AND RECONNECT, THIS SHOULD RESET THE BRAIN.

ALSO...WHEN YOU TURN THE KEY, LISTEN TO HEAR IF YOU CAN HEAR THE FUEL PUMP COME ON...IF NOT, GUESS WHAT? HOPEFULLY NOT!... BUT,YOU MAY NEED TO REPLACE THE FUEL PUMP, IF YOU CAN'T HEAR IT WHEN YOU TURN THE KEY, AFTER YOU'VE RESET THE BATTERY!

HOPE THIS HELPS!

Aug 30, 2011 | Geo Tracker Cars & Trucks

1 Answer

99 windstar van, won't turn over,won't start, headlights won't turn off,


baterr ywas dead changed it-new battery worked-discharged once air turned on-put in 2nd bateer yseems fimne as long as you don't turn on the air-if you do there is a clicking inside radioconsole and discharges battery

Jun 17, 2011 | 1999 Ford Windstar

Not finding what you are looking for?
Samsung PN42A450 Plasma TV Logo

Related Topics:

37 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76416 Answers

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

Todd Hill
Todd Hill

Level 2 Expert

433 Answers

Are you a Samsung Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...