Televison & Video Logo

Related Topics:

Anonymous Posted on May 07, 2013

CANT CHANGE CHANNEL FROM 03 TO 03-1,03-4 AND SO ON.

1 Answer

The Knight

Level 3:

An expert who has achieved level 3 by getting 1000 points

Top Expert:

An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

  • Televison & ... Master 76,851 Answers
  • Posted on May 08, 2013
The Knight
Televison & ... Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

Top Expert:

An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

Joined: Oct 14, 2010
Answers
76851
Questions
30
Helped
14995207
Points
237762

Do a hard reset to this set and check. Unplug the TV from AC mains wall socket, and re-plug it back after 5 minutes or so, This must make it a hard reset. If it to not help you, seek tech support. If you wish to get more details, surf the following link. There are over two thousand and four hundred posts. All are related to television and other domestic electronic equipment service help. You can get a solution there. Type in the brand name to your device to its search box, can be located at the top right of the display window. It will make search easy. More than Nine Lakh viewers cannot be wrong.http://electronicshelponline.blogspot.com/

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Vizio tv says no signal

you should be able to do that with the remote by pushing "03"
or with manual buttons in menu under tuning selections , add channel 03
0helpful
1answer

Sanyo vwm390 vcr

That might be the TV output channel. I found these instructions in a Sanyo manual:
How to set the DVD+VCR's RF output channel 1. Set the TV to the VCR channel (3 or 4) depending upon the selected channel. 2. When the DVD+VCR is turned off, press and hold CHANNEL (V/v) on the front panel for more than five seconds. It will turn itself on and "RF03" or "RF04" appears in the dis-play window. 3. Press CHANNEL (V/v) on the front panel or CH/TRK(v/V) on the remote control to change the RF output channel (CH 03 or CH 04). 4. Turn off the DVD+VCR.


It might solve the problem!
1helpful
1answer

Don't have remote can't change channel to 03

My solution: Buy a universal remote. You can get them at most electronic stores. After finding brand code in booket(usually included with new remote),enter the code then presto!
0helpful
1answer

Cannot get it to change the channel to recieve cable from the cable box. it says it is on channel 2.1

If you are using the channel up and down buttons, sometimes it will skip channels. Try manually putting in 03 using the remote to change to channel 3. Also make sure that in the TV menu you have the TV set to Cable instead of Antenna.
1helpful
1answer

TV is displaying Channel (03) all the time. Don't

You cannot change the channel without a REMOTE.

CLICK HERE
for a replacement.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.
0helpful
2answers

Cant get channel 03 off my scene of my tv

I dunno but i've got the same problem.. no matter what channel i'm on the green c03 or whatever stays up there... it's annoying.
Not finding what you are looking for?

34 views

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Cindy Wells

Level 3 Expert

6688 Answers

 Grubhead
Grubhead

Level 3 Expert

5755 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...