Factory settings I tried to get factory settings on my menu the only thing I could find was factory default. Is that the same as factory settings?

Try: Menu/Settings/Reset to factory defaults.

or Menu/Settings/Menu/Reset to factory defaults

Resetting the Printer to Factory Default

Settings

Resetting the printer to factory default settings can be useful when

you are troubleshooting with the printer.

CAUTION Resetting factory defaults clears the page buffer, removes downloaded

fonts and macros, and returns all print menu settings to factory defaults.

To reset the printer to factory default settings

1 Press MENU until RESETS MENU displays.

2 Press ITEM until RESTORE FACTORY SETTINGS displays.

3 Press SELECT until the following message appears:

RESTORING

FACTORY SETTINGS

This message displays until the printer has completed the
initialization

Resetting the Printer to Factory Default

Settings

Resetting the printer to factory default settings can be useful when

you are troubleshooting with the printer.

CAUTION Resetting factory defaults clears the page buffer, removes downloaded

fonts and macros, and returns all print menu settings to factory defaults.

To reset the printer to factory default settings

1 Press MENU until RESETS MENU displays.

2 Press ITEM until RESTORE FACTORY SETTINGS displays.

3 Press SELECT until the following message appears:

RESTORING

FACTORY SETTINGS

This message displays until the printer has completed the
initialization

Excerpt: SETUP MENU The third item of the MENU is the SETUP MENU. You can set system settings here. The last item on the menu is Restore Default: Reset all settings to the factory default value: "reset to default"
Source: http://www.manualowl.com/m/Haier/L32B1120/Manual/208789 (page 12)

When you first enter the printer menus from the operator panel, you may notice an asterisk (*)

next to a value in the menus. This asterisk indicates the factory default setting. These settings

are the original printer settings. (Factory defaults may vary for different countries.)

When you select a new setting from the operator panel, the Saved message appears. When

the Saved message disappears, an asterisk appears next to the setting to identify it as the

current user default setting. These settings are active until new ones are stored or the factory

defaults are restored.

To restore the original printer factory default settings:

1 Make sure the printer is on and the Ready message appears.

2 Press Menu until you see Utilities Menu, and then press Select.

3 Press Menu until you see Factory Defaults, and then press Select.

4 Restore appears on the second line of the display.

5 Press Select.

The message Restoring Factory Defaults appears followed by the Ready

message.

When you select Restore:

• No other button actions are available on the operator panel while Restoring
Factory Defaults appears.....

I’m happy to help further over the phone at https://www.6ya.com/expert/ron_9356d26241d4cbf7

Hi,

If the Menu settings in the camera is changed, then I suggest you to reset the Camera back to factory default. Initializing the Camera back to factory default will set all the settings in the Camera back to factory default.
To initialize the Camera back to factory default, select the INITIALIZE Option from the Main Settings 1 Menu of the Camera to OK.This will set the user defined settings back to factory default. The images and videos will not get deleted.
You can also try a manual reset;

Turn off the camera.

Remove the battery pack.

Press and hold the power button for 30 seconds.

Allow the camera to remain without power for 60 seconds.

Reinsert the battery pack.

Turn on the camera.

The blurry image capturing can also adjusted by changing the ISO Settings or the Scene Selection modes.

Thanks for using FixYa!

Instructions
Things You'll Need:
Acer PC or laptop
Step 1:
Click "Start" menu.
Step 2:
Click "Programs."
Step 3:
Click "Acer Recovery Management."
Step 4:
Click the "Restore" button on the bottom of the dialog box that opens.
Step 5:
Click "Restore System to Factory Default."
Step 6:
Click "Yes" in the warning dialog box which asks if you wish to continue the recovery process.
Step 7:
Click "Start" to restore the computer to the default factory settings.
Tips & Warnings
If you are unable to access the Start menu, use the recovery CDs that came with the computer or visit Acer's website (see Resources below).
Always make a back-up CD before restoring a computer to factory defaults.
Resources
Acer Website

there are two method of doing hard format on most of the nokia devices.
1.MANUALLY
1. go to menu and search for setting option.
2.enter in setting menu and search for restore factory setting option.
3. when you press on restore factory setting it will ask you for code enter 12345 the default code.
now you are done.
2.USING CODE
DIAL *#7370# on main screen.a menu will pop up like restoring all data press ok enter 12345 default code.you are done now.
TO RESTORE SETTINGS ONLY.
USE THE CODE *#7780#
always use fixya to fix every thing

Instructions
Things You'll Need:
Acer PC or laptop
Step 1:
Click "Start" menu.
Step 2:
Click "Programs."
Step 3:
Click "Acer Recovery Management."
Step 4:
Click the "Restore" button on the bottom of the dialog box that opens.
Step 5:
Click "Restore System to Factory Default."
Step 6:
Click "Yes" in the warning dialog box which asks if you wish to continue the recovery process.
Step 7:
Click "Start" to restore the computer to the default factory settings.
Tips & Warnings
If you are unable to access the Start menu, use the recovery CDs that came with the computer or visit Acer's website (see Resources below).
Always make a back-up CD before restoring a computer to factory defaults.

Via the Control Panel: The Resets menu makes it possible to reset factory settings, disable and enable Powersave, and update the printer after new supplies are installed. Configure device menu The Configure device menu makes it possible to change the printer's default print settings, adjust the print quality, change the system's configuration and I/O options, and reset the printer's default settings RESTORE FACTORY SETTINGS :Makes it possible to clear the page buffer, remove all perishable personality data, reset the printing environment, and return all default settings to factory defaults. Press Menu or (Select) to enter the MENUS.

1. Press (Down Arrow) to highlight Configure device menu .
2. Press (Select) to select Configure device menu
3. Press (down arrow) to System setup menu
4. Press (select) System setup menu
5. Press (select) Resets menu
6. Select RESTORE FACTORY SETTINGS.

I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309