Luminox Navy SEAL Dive 3103 Wrist Watch Logo

Question about Luminox Navy SEAL Dive 3103 Wrist Watch

2 Answers

Set the date

I have a 3100 series Luminox watch and lost the manual when I threw the wrapping away. How do you set the date properly. Mine changes dates everyday at noon. Thanks, greenonion

Posted by greenonion on

Ad

2 Answers

Anonymous

I set my date to the day before, then wind my watch on until it changes to todays date and then set the time.

Posted on Dec 26, 2007

Ad

Anonymous

If you dial in the date before noon make sure you stop winding the crown right after the date flips. That will give the internal mechanism the most room to cycle and not flip at noon. If you are setting it after noon wind the crown just until the date you want starts to move to the following date, but stop immediately after so as to not flip over. That way the mechanism will be close to changing the date and should flip it at midnight. Make sense? Hopefully, good luck.

Posted on Aug 11, 2007

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
3answers

Luminox Titanium Watch

you set it using the wheel pull it out , it should have two positions, one adjust time the other one date and chronograph, I see if I find full manual.
2helpful
1answer

Date is always a day behind or early ???

Use this link and browse through my TIPS AND TRICKS: http://www.fixya.com/MyProfile/tips.aspx?usrid=1700524. You will find manual for your watch there.
0helpful
1answer

How to set the date on luminox 3600 series watch

it has a screw-down crown, you have to turn it counterclockwise until it pops looses slightly, then you can pull the crown and set time...dont forget to push and rescrew it down to case to keep it water tight :)
4helpful
1answer

Setting alarm for Luminox 1848 Field Alarm Chrono

Normal 0 Here is the watch movement manufactures instruction .pdf.
RONDA startech Cal. 5130.D
http://www.ronda.ch/pdf/ba5130.De.pdf
0helpful
1answer

How do you change the battery in a series 3100 luminex navy seal

Take it to a reputable jeweler, this model has a screw off back and you need a special tool to remove it...good luck :)
0helpful
1answer

Luminox 3100 series stops working at night

Sounds like there could be a bit of foreign material floating about inside, or the new battery was not up to scratch. Take it back for checking.
0helpful
1answer

Luminox Marine 1590- need instruction manual to help setting date and time

This model is like any other analog watch, only difference is the screw-down crown...turn counter-clockwise until crown pops up...pull out 2 clicks and set time...push in 1 click to set the date, then into case completely...remember to screw down watch back into case...good luck :)
0helpful
1answer

Luminox 8200 series dive watch date set issue

This movement has a really quirky thing going on, its one of the few movements that you can actually turn the hor hand to set the day forwards or backwards...so on a day that goes from the 31 to the 1st it will advance fine, if there is no 31 for that month you can turn the hour hand 2 cycles and it will advance through the 34, continue to the 1st and set time...date can also be set by turning the hour hand backwards thru the dates...go ahead it doesnt 'hurt' the movement a bit, its made for this...so in oither wiords, when you get a new cell and the date is lets say the 15th and your watch says its the 2nd, just advance the hour hand through until you hit 15 and yoiu are good to go...hopefuly this help and didnt confuse much...good luck:)
Not finding what you are looking for?

1,672 views

Ask a Question

Usually answered in minutes!

Top Luminox Watches Experts

Mandeep  Singh
Mandeep Singh

Level 3 Expert

1184 Answers

Vinaya Kumar...
Vinaya Kumar...

Level 3 Expert

1124 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

47723 Answers

Are you a Luminox Watch Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...