- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Have you closed the session when you made the CD? It is necessary to do that in order to play it in anything else besides the computer that made the CD.
If the Sony front end unit (stereo) has RCA jacks (Left and Right) in the back it's an input to the Xplode amp. If that's right then the Subwoofer putputs should plug or wire into the Xplode amp. I haven't hooked these up for some time but try a search on Youtube with the units you describe I'm more than 90% sure that there are videos there.
You have put the remote antenna wire to the remote turn on of the amplifier. The radio cuts off the power to the "power antenna" when you switch to a different mode... so your amplifier is now losing the turn on signal it requires to stay on.
Simple 2 minute fix.
Thanks for using FixYa - a FixYa rating is appreciated!!
REMOVE THE FACE PLATE THERE SHOULD BE A RESET BUTTON ON THE FRONT OF THE RADIO PUSH THAT AND TRY AGAIN IF THAT DOESNT WORK THEN PULL THE RADIO AND DISCONNECT FROM POWER 4 A LIL BIT AND THAT MAY WORK
Please press Reset switch in CDX-S2200. You can see it if you de-attache front panel. If problem still exist, then you need to replace IC300 " 6-705-360-02 " IC TDA8588BJ/N2/R1
1. Press and hold the SRC button until "ILL" appears on the display. 2. Press either the up or down switch until "DE" appears on the display. 3. Rotate the volume control until "DE 0" appears on the display. Don't touch the stereo for several seconds after that, so that it accepts the command and goes back to its normal display!
I guess is your using a CD that was made from a blank one.. Try putting in a CD that you didn't burn.. and see if it works
Some CD players does not place burnt CD's
Hope i helped
cya buddy
please be fast
be fast
be fast
×