Question about XO Vision Wireless Infrared Stereo Headphones for Car Car Video Player
I have just purchased a set of Infrared wireless stereo headphones for my vizualogic headrest system that we have installed in the car. Both screens are infrared based but I can get anything but an occasional static blurb on the headphones. The headphones seem pretty straight forward - directions weren't even included with the headphones, but I must be missing something! I tried turning on the headphones first and then the TV but they still don't sinc. Any suggestions? *****XO vision -460- wireless headphones
SOURCE: Wireless Headphone not working with my portable DVD player
could be the wrong IR frequency. there are 2 different types
Posted on Oct 23, 2007
SOURCE: XO Vision XOD1740BT in dash dvd player bypass code
I solved it By connecting the pink wire to a constant ground this acts as a bypass so the unit plays anytime.
Posted on Dec 17, 2007
SOURCE: Wireless Headphone not working with my portable DVD player
Firstly, make sure your DVD have built-in IR wireless module so that your headphone can receive the audio signal from your DVD player.
Second, it should be clear which frequency transmitted from your DVD player. Generally speaking, there are two frequency of IR transmitter.One is 2.3MHz/2.8MHz. another is 3.2MHz/3.87MHz. Only emission frequency same as receiver can receive the audio signal.
Posted on May 19, 2008
SOURCE: help me with back up camera for xo vision xod1740bt
I am just giving a suggestion. I too need to know how to wire this. From what you posted it sounds like you hooked the wire to a constant +12v that is always on. Forgive me if I am wrong. Anyway, Did you connect this wire to rear reverse light power. I think from what you say it is supposed to be connected to the positive side of that light. If this solves your problem can you PLEASE let me know the full details of everything else you hooked up on the circuit to make the backup work. For instance what is the label of the orange wire. TIA.
Posted on Apr 06, 2009
297 views
Usually answered in minutes!
Recently i bought the XO Vision IR - 460 Wireless headphones.
but i dont know how to connect to the laptop using Infrarred.
i have no manual to connect this to my laptop and do i need to install something into my laptop or how to do this.
help me in this.
plz email me at
[email protected]
thanks,
i recently received these headphones ir 460 now i need some kind of ir transmitter am i right ?do you know what type or where to get one
×