Purchased used, need help

In time mode, hold set (bottom right button) to change date and time. The selected (flashing) item can be changed in one direction only using the up (top right) button. Press set again to cycle through each item until desired settings are chosen.
In stop watch mode, the up button starts and stops the stopwatch, the set button will take a split time while the time is running. To reset the stopwatch, press set once while the time is stopped.
In alarm mode, the up button turns the alarm on and off. There are three alarms available. To cycle though alarm times, press set. To set an alarm, press and hold set until the time flashes, then set the alarm time using the up button, cycle through hour and minutes using the set button. When finished, press set again.
Timer mode. To set the timer time, press and hold set until the time flashes. The timer goes up to 23h:59m:00s. You cannot set seconds. Once set, the timer can be started and stopped using the up button. There is no reset for the timer, to start a new timer the time must be manual changed again.
To check heart rate, press and hold mode until PUL is shown, place two fingers, one each on the top and bottom metal contacts for 6-10 seconds to get reading (This works best when not in motion).

My watch has model number 504-tsk085, labeled Timex 1440 Sports, and Timex provides the incorrect manual for it online. I wrote these instructions after careful experiment:

Upper left button: press to switch to a stopwatch, or...

Press and hold to enter alarm setting mode. Once flashing press again to enter time/date setting mode.
-- you can only do one or the other without exiting the setting
mode (time or alarm set).
- within the setting mode you use the two right side buttons
in obvious ways to set times/dates
Exit setting mode by pressing upper left again

Lower left button: light
Upper right button (when not setting time): reveal date while pressed

Lower right button (when not setting time): reveal alarm time while pressed.

ALSO: WHILE lower right button is pressed you can change alarm
on/off and chime on/off through the four possible settings by
secondarily pressing the upper right button repeatedly.

Hi wtgillo,

Hi there I see that you are in need of assistance setting time on your Armitron Wrist watch.

I would be more than glad to give you details on how to, Please see steps below.

• Your Armitron Watch will have Four Button on the side of the watches rim.
• Button on the upper Left is MODE.
• Button on the lower Left is LIGHT.
• Button on the upper right is DATE.
• Button on the lower right is Alarm.

See Steps below:
*Setting the time*

• Press and Hold down the Mode Button til the Hours flash
• Then push Alarm Button to set the Hours
• Press and Hold down the Date Button till the Minutes flash, then push D/Alarm Button to set the minutes
• After setting the minutes on your watch, Press date till you get the month flashing push Alarm to set the month
• Press the Date again till the Date flashes, then push Alarm to set date
• Press the Date again till the Date on your watch flashes, then push Alarm to set the date
• After setting everything push the Mode Button again just once to set everything or finalize your settings on the watch.

I hope that this will be of help regarding your query on how to set the time on your Armitron watch, I also included the setting of the time and date just for further details.

Have a nice day,

mvincentc

Hi robinmsavage,

I will be glad to help you with your concern regarding your Armitron Wristwatch, what exactly would you be experiencing? cause I only put info on how to set time and date on the Watch.

Please see below steps:

• Your Armitron Watch will have Four Button on the side of the watches rim.
• Button on the upper Left is MODE.
• Button on the lower Left is LIGHT.
• Button on the upper right is DATE.
• Button on the lower right is Alarm.

See Steps below:
*Setting the time*

• Press and Hold down the Mode Button til the Hours flash
• Then push Alarm Button to set the Hours
• Press and Hold down the Date Button till the Minutes flash, then push Alarm Button to set the minutes
• After setting the minutes on your watch, Press Date till you get the month flashing push Alarm to set the month
• Press the Date again till the Date flashes, then push Alarm to set date
• Press the Date again till the Date on your watch flashes, then push Alarm to set the date
• After setting everything push the Mode Button again just once to set everything or finalize your settings on the watch.

I hope that this will be of help regarding your query on how to set the time on your Armitron watch, I also included the setting of the time and date just for further details.

Thank you for choosing Fixya,

mvincentc

Here's how you set the 40/6623 M175 for anything. I figured it all out with help from here :). Okay so want to set the alarm? Press MODE once. Then hold it. And use the DATE and ALARM buttons to set the alarm. Press MODE twice and you're done. To set time do the step before this and press MODE once. Use the DATE and ALARM button to set the time. As for the 24 hr deal what you do is hold ALARM and press MODE or hold MODE and press DATE. To turn alarm on/off hold ALARM button and then press the DATE button. To set the date go to time set mode and keep cycling between the hours and mins until you get to the date :). That's all you gotta do :D. I know many of you need the instructions so here it is!!

ALL PARAMETERS CAN BE ADJUSTED BY USING KEYS

GIVEN BACKSIDE...KEYS ARE

MODE (LONG PRESS-4 SEC) TO ENTER INTO SETTINGS;

UP/DOWN TO CHANGE THE PARAMETERS; \

*C/*F KEY TO TOGGLE BETWEEN TO TEMPERATURE FORMAT;

SNOOZE BUTTON TO SET SNOOZE IN ALARM-MULTIPLE SNOOZE CAN BE SET;

RESET KEY CAN BE USED TO RESET CLOCK TO DEFAULT;

DAY COUNTDOWN , AND TIME COUNTDOWN CAN BE ADJUSTED;

DETAILED INFORMATION TO SET THE CLOCK

INSERT CELLS;-SCREEN SHOWS DEFAULT VALUES-INITIAL MUSIC WILL RING;
LONG PRESS MODE BUTTON-KEEP IT PRESSED UNTIL 12 STARTS BLINKING;
USE UP /DOWN BUTTON TO ADJUST HOURS...
THEN SIMPLY PRESS MODE AGAIN, NOW MINUTES 00 IS DEFAULT WILL START BLINKING;
USE UP/DOWN BUTTON TO ADJUST MINUTES;
AGAIN PRESS MODE, SCREEN WILL SHOW YEAR 2002 DEFAULT BLINKING, USE UP/DOWN KEY TO ADJUST YEAR;
AGAIN PRESS MODE, SCREEN WILL SHOW MONTH BLINKING, USE UP/DOWN KEY TO ADJUST CURRENT MONTH;
AGAIN PRESS MODE, SCREEN WILL SHOW DATE BLINKING, USE UP/DOWN KEY TO ADJUST YEAR;
AGAIN PRESS MODE, SCREEN WILL SHOW 12:00 BLINKING WITH ALARM SIGN (FOR ALARM SET);USE UP/DOWN KEYS TO SET ALARM, FIRST HOURS AND THEN MINUTES FOR ALARM; THEN ON PRESSING YOU CAN SELECT SNOOZE MINUTES;
AFTER SNOOZE ON PRESSING MODE AGAIN YOU CAN SELECT DAY COUNTDOWN TO SELECT 999 DAYS COUNTDOWN FROM CURRENT DATE;

when watch displays time and everything .....
each and every buttons has some function;(shortcuts)
press down to toggle between 12hr/24hr format;
press up to enter contdown timer;
press snooze to set snooze in alarm;
press c/f to toggle between two temperature formats;
press mode to toggle between alarm time and current time

I don't know whether this is what you are looking for, as the watch comes with no packaged instructions OR general support, on their website, XD,

Nik.

http://home.earthlink.net/~eldonenew/armitron.htm

or

http://www.ehow.com/way_5786808_armitron-all_sport-watch-instructions.html



Armitron All-Sport Watch Instructions By Brian Walker eHow Contributor 9 Found This Helpful The Armitron All-Sport is a unisex style of watch made by Armitron that features a digital readout and four buttons around the outer dial for adjusting various aspects of the watch. It can set alarms, keeps the time as well as the date, and has a built-in backlight. Accessing and adjusting these various settings is a fairly simple process.

Other People Are Reading

• How to Set an Armitron WR330 Watch
• How Do I Change From Military Time on My Armitron Watch?

Setting Date, Time and Alarm

• To enter the date and time setting mode, press and hold the "mode" button, located on the top-left of the watch. Continue holding this button until the display begins to flash. This first display is the alarm setting, should you choose to set an alarm to go off. If you'd like to set the alarm, use the "alarm" button on the bottom-right of the watch to advance the hours to the desired one. Then press the mode button again; this will cycle through the minutes and seconds of the alarm to allow you to set those as well. Once you have set the alarm, you can press the "date" button at the top-right of the watch to proceed to the regular time setting. These numbers, which will now be flashing, also are adjusted by pressing the alarm button to change them. Pressing the date button again will now cycle through the hours, minutes, seconds and the date. As you continue to press the date button, the All-Sport will continuously cycle through these options; don't worry if you forget to set one, you can simply press the date button a few times until you get back to the setting you need to change. Once the alarm, time and date have all been set, you can press the mode button one more time to exit to the normal watch mode that will display the date and time.

Using Chime and Alarm

• The Armitron All-Sport features both an alarm and an hourly chime. The alarm function will cause the watch to continuously beep at the selected time until you turn it off by pressing a button. The chime will cause the watch to beep once every hour. You can turn both these features on and off by pressing and holding the alarm button and while holding it pressing the date button. The first time you do this, the chime will turn on and a small house symbol will be displayed on the watch face. Performing this button-pressing sequence again will turn on the alarm, which in turn displays a small clock icon on the watch face. Each successive pressing of this button sequence will alternate between the chime and the alarm, turning them either on or off.

Backlight

• The All-Sport also features a built-in backlight to help you view the watch in dark conditions. This light can be activated by pressing the "light" button on the bottom-left of the watch. Pressing this button is the only way to activate the light, and doing so will only cause the watch to illuminate for a few seconds at a time.

Read more : http://www.ehow.com/way_5786808_armitron-all_sport-watch-instructions.html

Setting my Aspen Digital Watch
Button designations:
(NITEGLOW) B C (START/STOP)
10:47
(MODE) A D (SPLIT/RESET)

To Set Time, Date and Day:
Press A 3 times; Seconds Flash; Set to 00 with C
Press D; Minute Flashes; Set Minutes with C
Press D; Hour Flashes; Set Hours with C
Press D; Date Flashes; Set Date with C
Press D; Month Flashes; Set Month with C
Press D; Day Flashes; Set Day with C
Press A to Quit

To Set Alarm Time:
Press A 2 times; Hour Flashes; Set Hour with C
Press D; Minutes Flash; Set Minute with C
Press A to Quit
To Set Alarm ON or OFF:
Hold D in to see Alarm Time and Press C to toggle Alarm ON/OFF

Operation:
Hold C to see Month and Day.
Hold D to see Alarm Time; Press C to toggle Alarm ON/OFF.

Hi catlady05,

To set the digital time and date on your Timex Ironman, please follow the steps below.

1. press and hold the "set" button for two seconds.

2. Use the "advance" button to reach the correct hour.

3. Press the "mode" button, followed by the "advance" button to set the minutes on your Timex Ironman.

4. Repeat the procedure of pressing the "mode" and "advance" buttons to set the month, date, year and day of week.

5. When you are finished setting the time and date, press the "set" button to save.

Setting an Alarm

1. Begin by pressing the "mode" button until the alarm screen appears.

2. Press the "set" button and use the "advance" button to set the hour for your alarm.

3. Repeat the same procedure to set minutes and seconds for your alarm.

4. When you have finished setting the alarm, press the "set" button, followed by "advance" save and activate your alarm.

5. When you alarm sounds, you can deactivate it by pressing any button on the watch.

Hope it helps.

Thank you for using FixYa.