Kodak EasyShare C643 Digital Camera Logo

Related Topics:

Question about Kodak EasyShare C643 Digital Camera

2 Answers

Broken LCD My LCD on my Camera broke... I have no idea how, but I went to use it and I can't see anything but a big blob in the middle of my screen... How do I fix it?!

Posted by Staky on

  • 1 more comment 
  • mikewell Nov 21, 2007

    my lcd screen is pushed in in the bottem left hand corner and i need a new screen to replace i already have it apart i just need a sceen shiped to me so i can install it

  • giorgis Nov 21, 2007

    I haxe exactly the same problem with kodak c643 and when communicate with kodak"s service told me that is impossible to send me only the part to install it my self[iam technisian]and is nessesary to send the part for repair with totaly cost 145euros[215 $]

  • Anonymous Mar 25, 2008

    Yes I have the same problem...my LCD screen malfunctioned.The camera is just over the 1 year warranty,and basically used on one vacation.

    P.S. thank goodness we still had our 33year old Canon AE1,and it still works 100%

×

2 Answers

Anonymous

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Au optronics. link: http://www.beyondinfinite.com/lcd_display_selector.html

Posted on Dec 12, 2007

×

Ad

bengsoon Neo

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 63 Answers

No way to fix the broken LCD, only solution is to replaced.and is very costly.hope it help.

Posted on Aug 09, 2007

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

I have a Sony lcd data projector- VPL-SC50.. There is a big black blob in the middle, with other lines near the edges. And the blob is growing larger now. But it does not look like a burn out, it looks...

Normally a "blob" on an LCD is a delamination of one or more of the LCD panels. But, they are usually not black. You may have a poor ribbon cable connection from the main board to the LCD panels....there is a ribbon connection to each of the Red, Green and Blue panels. It's either that or a main board failure, but certainly soemthing you want the factory or other authorized service center to check out.

Good luck.
1helpful
1answer

A New 2G SD Memory Card Destroyed Samsung L60 Camera's Screen

Ron,

I am kinda confused what you mean by black blob, but anyhow a SD card cannot do this to a camera as long as the camera supports the memory card. I feel there is a little more to it then this. The lcd will need to be repaired this will need to be taken to a camera shop to repair this with a new lcd around $50 bucks respectivly. I find it hard to understand this ether as this should not have happend. the memory card if compatable should not have shorted this camera lcd out.

Please do leave a postive rating and feeback for your free answer today.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/edwy_1a56970cf1ea4620

1helpful
1answer

Hitachi 55vs69a yellow blob in center

you most likely have a bad light engine.
0helpful
1answer

Gray pixels create couple of blobs

I had the same problem on my SD870. I sent it back to Canon and they replaced the LCD screen for free under warranty.
2helpful
1answer

Lcd screen has black spot inside, outside fine, takes pictures

you should replace the lcd screen from an authorized service center. or you can buy the lcd screen alone from ebay and find someone to replace it .remember
never open the camera unless you know very well how to replace it.thanks for using fixya. please dont forget to rate my solution
3helpful
2answers

I have a blue oval hue in the middle of my screen, how to fix?

This problem is known as a defective Light Engine. The cost is usually 800.00 plus.
0helpful
1answer

Preview screen half white, with black blob!

I think ribbon connector of LCD is misaligned in your camera.
If you are comfortable with it, please apart camera and readjust ribbon connector at main board.

0helpful
1answer

I broke my camera in my purse. It's an HP R742 and the LCD screen is broken. Unfortunately I was going to return it before it broke because of a glitch is there anything I can do to repair the screen?

well I dont know if this still will be use full for you but future internet answer seekers here you go. I had same problem and I was able to fix the camera. I used this site as help nothing special but atleast gives idea what am I working with. and I found parts on ebay. good luck everyone!

http://www.digitalcameraeshop.com/hpr742v.php
0helpful
1answer

Broken lcd screen

Definitely a broken lcd, and Philips will not sell you this individual componenet - find out if you are still under warranty and get it replaced. Sorry.
0helpful
1answer

Blob on screen

You will need to replace the screen to remedy this situation. The screen has been stressed somehow, and is broken internally...accordianman
Not finding what you are looking for?

100 views

Ask a Question

Usually answered in minutes!

Top Kodak Cameras Experts

Cindy Wells

Level 3 Expert

6627 Answers

Marvin
Marvin

Level 3 Expert

85242 Answers

Steve

Level 3 Expert

3290 Answers

Are you a Kodak Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...