Sandstrom manual shfjmc11

Original model in box with the instructions for sale:

https://www.ebay.ie/itm/Sandstrom-Portable-DAB-Radio-Retro-Collection-SPLDAB17-/173111352191

Tune to the station you want - press Mode/Menu.
Rotate Tune/Select one step to the right to display Store and press Tune/Select.

Try to download from the following site,see if it helps
https://www.manualslib.com/manual/749223/Sandstrom-S08dpf10.html

just inside the ipod cover you will see a thin black plastic flap that is also the ipod lever, protruding into the door. you need to insert a small thin knife and push this flap back so it clicks flush into it's position. this takes the lock off and you will be able to open the door.

That's right. Sandstrom (Dixon's) will email you the manual for their DAB/FM/iPod dock if you ask.
http://www.sandstromstyle.com/contact

From the main menu, select the icon that looks like a little radio
To search for the next stronger signal, press and hold the up or down arrow
To fine tune the frequency, briefly press the up or down arrow

From the main menu, select to enter
radio mode.
• The earphones cable acts as FM
antenna.
Manually tune a radio station
While in mode, you can manually tune to a
radio station:
1 To search for the next stronger signal,
press and hold / .
2 To fine tune the frequency, briefly press
/ .
Auto-tune preset radio
station
The auto-tune feature of GoGear Vibe helps
you find radio stations and save them under the
preset numbers.
1 While in mode, select [Auto tune] >
[Yes].
»» The radio automatically tunes radio
stations and saves the frequencies to
presets.
»» There are 20 presets available.
»» To stop auto tuning, press .
»» To exit radio, press and hold for 2
seconds.
EN

Press the Menu button. At some point it'll put an 'M' next to the station frequency. Then hit the seek up and down button.

Hello george_nutti,

The model number you posted is for a center channel speaker which has no controls, and not knowing the exact model number it's difficult to be specific.

Some Kenwood KDC models allow you to select one of 3 "tuning modes", 1) AUTO1 - Automatic search for stations; 2) AUTO2 - Search Preset stations; 3) MANUAL - Normal manual tuning control. If your Kenwood is one of these models, you need to set the tuning mode to MANUAL. For Kenwood Excelon HD receivers, direct access tuning is done by using the included remote. 1) Press DIRECT button on the remote; 2) Press number buttons to enter desired channel number; 3) Press DIRECT button again to exit direct tuning.

Hope this helps.

try googling the manufactorie compony most of the have manuals online that you can download