Question about GE WVSR1060A Top Load Washer

1 Answer

GE WJRR4170 washer comes out of overflow tube on super load. It does not on Large load size. I have the front off and can see a large difference in water level from large to super size. Is this adjustable?

Posted by 4warners on

Ad

1 Answer

Anonymous

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I have a 2005 model GE washer that would overfill only on SUPER size load. After looking around on the web, then inside the machine, I checked the tube from the tub to the switch, no problem there. Then I found an adjustment screw on the load size selector / pressure switch (all one piece). I moved it one turn clockwise, then ran a test cycle. I got lucky on the first try... no more overflow, the water comes up just above the top holes in the tub. I hope this will help others.

Posted on Jul 12, 2009

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Washer overflowed after moving Load Capacity Switch from Super to reset and then to Large load?


On this model of washer you have 4 separate components that could cause overflowing. The water valve, pressure switch, pressure switch hose & the air dome. If you have to turn the water off to prevent overflowing, I would recommend replacing the water valve. If you can turn the timer off & the water stops overflowing, I would recommend checking the pressure switch, hose & air dome.

Jan 16, 2011 | GE Washing Machines

1 Answer

Washer agitates so vigorously water sloshes out of the overflow tube on large,extra large and super cycles. Tub slams back an forth on agitate cycle is this normal?


sounds like to much water check diaphram switch this controls the amont of water taken in this is not normal operation also check that the drum dampers are working ok or have not come adrift, when empty if you was to push the drum back and forth you should feel quite a bit of resistance if it moves easly then i would check the dampers

Jan 16, 2010 | GE Profile WPRE6100G Top Load Washer

2 Answers

Washer is leaking out of overflow tube


first
check the drainage pipe, the hose goes into and make sure its not clogged, once you know there are no obstructions reattach the drain hose. be sure it goes a couple of inches into the pipe but has a little space for air flow between hose and pipe. I this doesnt fix the problem the hose made need to be raised, it should enter the pipe several inches higher than the washer. Hope this helps

Nov 28, 2009 | General Electric WHDSR209DWW Top Load...

1 Answer

GE wbsr1060T washer overflows on 'Super' load size setting


HI, there is a pressure switch for the water level regulation that seems to be malfunctioning in your unit at this time. You will need to replace this switch asap. this will correct this issue.

Click here to order

Jul 26, 2009 | GE WVSR1060A Top Load Washer

1 Answer

Load size, spin cycle, and other cycles do not work properly


error code f 06 keeps coming up and we cannnot afford to have it serviced at this time we were told it had something to do with the control panel

Mar 22, 2009 | GE Profile WPSR3100W

1 Answer

Washer leaks now when doing large loads.


pop the front panel you can do this with a putty knife. where the top is 2 inches down you will see a creas use a flash light you will see the 2 clips push in on the clips and pull out you will be able to access where the tub is to see where the leak is comeing from

Jan 04, 2009 | GE WBXR3100B Top Load Washer

1 Answer

Water doesn't stop filling tub in washer, water overflows everywhere. washer doesn't wash on super/large loads and doesn't spin on any loads. washer is only 2 years old


water not stopping filling is the pressure switch its a long thin tube that goes from the bottom of drum to the front top about the thickness of a pencil this needs taking off clearing through and checking for pin holes then refitting this should solve water problem

Jun 19, 2008 | Washing Machines

1 Answer

Overflowed on Large load size


i think the water level sensor tube got filled when you had it on it's side, then after the first spin and drain cycle, the tube was again cleared out and ready for real action.

Oct 29, 2007 | GE WJSR1070A Top Load Washer

Not finding what you are looking for?
GE WVSR1060A Top Load Washer Logo

1,013 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Washing Machines Experts

Michael Thomas
Michael Thomas

Level 3 Expert

3056 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

Mike

Level 3 Expert

4369 Answers

Are you a GE Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...