Pioneer AVIC-D2 DVD Nav/6.5" Screen/AM/FM/CD Player Car Video Player Logo

Question about Pioneer AVIC-D2 DVD Nav/6.5" Screen/AM/FM/CD Player Car Video Player

2 Answers

How do you connect a pioneer d2 navigation system to a 2006 ford expedition entertainment system

How can I connect the Pionner AVIC d-2 to the DVD factory installed unit in my 2006 Ford Expedition? When I removed the radio/cd player to install the Pioneer AVIC d-2 unit I couldn't find a way to connect the ceiling mounted factory installed DVD player. The DVD unit works but theres no sound??

Posted by hogman on

  • hogman Aug 12, 2007

    Than you for your quick response. I haven't tried your suggestion but it really makes sense to me now.


    Thank you.

×

Ad

2 Answers

Anonymous

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I need 2 know which are the power n ground wires on the back si u can connect it 2 my xtera 03

Posted on Aug 27, 2010

Ad

Brian Neathery

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 156 Answers

You need to identify the four wires that carry the DVD audio in the factory plug, and re-wire them to RCA plugs that can be used with the Auxiliary input RCA jacks on your Pioneer unit. The four wires should be: Left (+) light green Left (-) white Right (+) red Right (-) black The easiest way is to purchase some inexpensive RCA cables (or better yet, speaker wire with RCA ends). Cut the cables and wire the center pin conductor wires to the (+) audio wires in the stock plugs, and connect the outer shield conductors to the (-) wires. Then connect the RCA plugs to your head unit's auxiliary input jacks.

Posted on Aug 08, 2007

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2helpful
1answer

How can i change the language for my pionner AVIC - DRV20K

Reset the unit and begin with the setup screen to change the language.
0helpful
1answer

Don't know how to set the clock on the Pioneer AVIC-D2 head unit

drop by your local car stereo dealer and ask them NICELY to reprogram the time for you...then, a NICE person would but the guy lunch, what $10?
Good Luck
0helpful
1answer

Pioneer AVIC-D2, can not change system

Go to the Pioneerelectronics website and the instruction manual is there in pdf format you can view and print. You will have to select in dash navigation system and just click on any one then click on older models.
0helpful
1answer

The screm of navigation it blue on my avic n-2 pionner

Hi. I can fix you screen for $100. Email me at [email protected] or call my cell 801-414-4566. Hogan.
0helpful
1answer

AVIC-D2 bad navigation?

what i did is, i went into the destination window and pressed the settings tab, then i pressed the hardware information after that i pressed the 3d calibration and then i cleared the section where it said hybrid 3d. after a while it worked fine.
0helpful
1answer

Update dvd

type this on ebay, is way cheaper than pioneer websitePIONEER AVIC CNDV-80MT 2008 GPS MAP DVD
3helpful
1answer

Some buttons don't work

Pioneer AVIC-D1 Touch Screen Recalibration

If your pioneer AVIC car navigation unit does not register your touches or the wrong button is “pressed”, you need to re-calibrate your screen’s digitizer.

1-Hold the Eject button down until the face of the unit drops all the way
2-Using a pen hold down the reset button (just above the joystick) and the navigation disc eject simultaneously.
3-Release the reset button.
4-Release the dvd eject button next. The display will read “press reset”
5-Push the joystick up two times.
6-Push the joystick down twice.
7-Press the joystick in.
8-The service menu will appear after a short pause. You can navigate the service menu using the joystick.
9-Chose the first menu option and press in on the joystick.
10-Trace the screen with a stylus.
11-"P.ADJ" is the back button
12-Chose the second menu item in order to calibrate the touch screen. Use a stylus again and tap the "+" sign on the screen. (You may have to touch slightly off center if the digitizer is damaged. In which case things will still be off but it will be much better.)
0helpful
2answers
2helpful
1answer

DVD WON'T PLAY ERROR CODE 17 &12

the d2 does NOT play dvd's,the dvd rom slot is for the navigation disc ONLY. you must hook a dvd player to the RCAs.
Not finding what you are looking for?

491 views

Ask a Question

Usually answered in minutes!

Top Pioneer Car Audio & Video Experts

 Francisco Mauricio...
Francisco Mauricio...

Level 3 Expert

1551 Answers

The Knight
The Knight

Level 3 Expert

76835 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8991 Answers

Are you a Pioneer Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...