Question about SanDisk Sansa e200 MP3 Player

1 Answer

Gone mad Everytime I plug the USB in it will say connected and then the screen (on the mp3 player) gets line through it and then goes blank, and keeps doing it as long as it is pluged in.

Posted by keldogg on

Ad

1 Answer

ThaMp3Doctor

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 8,597 Answers

These are the most common methods for recovering Sandisk's Sansa Mp3 Players. I have been almost universally successful in recovering Sansa players using one or a combination of these methods. These methods do not work if you are having synchronization or music format issues - they are for recovering a player that will not power up, freezes, flashes, is not recognized by the computer, and a host of other issues.

Reset the Sansa Player first. On most models, restart is done by holding the power button in for 15 seconds or longer. Check your specific manual to be sure. The manuals are available from the Sansa website if they have been misplaced.
Download the Sansa Recovery Tool from the Sansa website.
Format - Erases Everything: Connect your Sansa player to the computer and open Windows Media Player. Click on the Sync tab. Pull down the drop down menu underneath the Sync tab by moving your cursor over the Sync tab and left clicking on the little black arrow underneath the Sync tab. Highlight "Sansa 1GB" (wording may vary slightly), and then select "Format." - this should erase everything.
Firmware Upgrade- Erases Everything: Get the latest firmware upgrade from Sansa - it updates the firmware and erases every song in the player all at once. Note: this method doesn't work if already have the latest firmware. Go to this website and click "Firmware Updater" to find out: http://www.sandisk.com/DriverDownload/driverList.asp
If these fail, then:
Try this: disconnect the player from the computer, turn it off, hold in the volume + button, and reconnect the player to the computer while holding the volume + button in. Keep holding the volume + button for an additional 5-50 seconds. Windows should eventually go into recovery mode and revive the player- it will pop up a window that says Found New Hardware Wizard.
If you get the problem where MTP Device keeps popping up continuously, uninstall the “MTP Device” by going to Start à Control Panel àSystem à Hardware à Device Manager (you computer may vary slightly, depending on Windows Version).
You may have to restart your computer after each of these methods to get them to work properly. Disconnect your Sansa player BEFORE shutting down your computer.
-Tha Mp3 Doctor

Posted on May 26, 2008

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Screen goes blank in aux mode


Check parking brake connection. Not connected properly.

Apr 22, 2014 | Pyle PLD40MU 4.3 LCD Touch Screen Car...

2 Answers

Mp3 will not work


disconnect the USB cable and let the battery run down when the screen goes blank you can reconnect the USB cable and the device will rechange and you can do you thing

Jan 04, 2009 | SanDisk Sansa Fuze MP3 Player

1 Answer

My e250 is stuck


sounds like it was'nt safely ejected and is damaged

Nov 09, 2008 | SanDisk Sansa e250 MP3 Player

1 Answer

When I plug my mp3 player into the Usb port, the screen goes to the connected screen for a split second. Then it goes back to the normal screen. The mps player will continue to go back and forth betwwen...


When I plug my mp3 player into the Usb port, the screen goes to the connected screen for a split second. Then it goes back to the normal screen. The mps player will continue to go back and forth betwwen the two not really connected or playing untill I unplug the cord then its normal.

Aug 27, 2008 | Audio Players & Recorders

1 Answer

Sansa Media Disc freeze/restart


You can try to reset the device by pressing the power button for about 15 to 20 seconds..if that doesnt work I would recommend you to go to the sandisk site to update the firmware on your device or you can contact sandisk to they can help you with updating the firmware on your device..Please follow the link below to get the firmware
http://www.sandisk.com/Retail/Default.aspx?CatID=1376

The number for sandisk is 1-866-726-3475
Please rate accordingly
Thank you
Computerrep

Aug 22, 2008 | SanDisk Sansa e200 MP3 Player

1 Answer

Frozen screen


Well you could do wut i did. i threw it onthe ground and now it works again. Everytime it does it to me i drop it and it works again.

Jan 22, 2008 | SanDisk Sansa e250 MP3 Player

1 Answer

Hd3


1. install the drivers from cd which came along with the player
2. check the USB adapter cable
3. Check the message dialong whenever you connect your USB cable to ur computer on the taskbar.
4.if you get message " one of the usb device connected cannot be recongised" then the problem with the Player adapter controller
5.your computer USB may be malfuntioning
6. check for the drivers installed. if not install drivers from the installation diskette
thank you

Nov 09, 2007 | Sony Network Walkman NW-A1200 MP3 Player

2 Answers

Not working:


iv also got the same problem with the a215 i plug it into my computer even when playing music and i turns off soon as i plug into the usb drive please help me ?

Nov 08, 2007 | AIGO DIY MP3 Player

1 Answer

Doesn't power up replaced batteries


This is the worst mp3 player ever invented - i have to tell you this up front. There is no driver, the company does not support the product anymore - I would return it now while you still can.

Either the device is bad, the pc port is bad, or the software is faulty. Try connecting to different usb port, then a usb port on a different pc with a compatible os. If still not recognized, then there is physical damage to player.

Try this: disconnect the player from the computer, turn it off, hold in the volume + button, and reconnect the player to the computer while holding the volume + button in. Keep holding the volume + button for an additional 5-50 seconds. Windows should eventually go into recovery mode and revive the player- it will pop up a window that says Found New Hardware Wizard.

Sep 23, 2007 | iLO (2 GB) MP3 Player

Not finding what you are looking for?
SanDisk Sansa e200 MP3 Player Logo

Related Topics:

32 views

Ask a Question

Usually answered in minutes!

Top SanDisk Audio Players & Recorders Experts

Jean Sintulaire

Level 3 Expert

759 Answers

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

Daniel Dollive
Daniel Dollive

Level 3 Expert

315 Answers

Are you a SanDisk Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...