End/resume workout Treadmill never finishes any programs either on manual or ifit mode. Stops workout and says end or resume workout, but you can never resume and you can't use any of the incline or speed buttons.

SOURCE: Buttons Froze during workout, now none of them work

It sounds like you just need some calibration. To calibrate incline, turn power on press press any incline buttons, as the incline try to change unplug the key. Now re-nsert key and incline will self calibrate,

SOURCE: My Nordictrack treadmill seems to

it is trying to calibrate itself, let it go the whole way up and then down without interrupting it. Then it should be fine.

SOURCE: Nordic Track Ifit Treadmill has power but walking pad not working

If everything on the display console is working correctly then we know it is either a problem with the wires from the console to the controller or the controller itself. In most cases this means you need a new controller. To verify, take off the motor hood and find the green circuit board called the motor controller. With the power on go into manual mode and push the speed up button to a slow speed. If you see an LED light with "spd ctrl" next to it flickering but the belt still does not move then we know the problem is with the controller sending the signal to the walking belt, in which you should check the wires that go to the motor. If they are connected correctly then we know a new controller is in order. If you do not see a flickering light then it means the speed signal never got there and the problem will be with the wires going from the console to the controller. This is called an upright wire harness.

SOURCE: The digital touch screen display is not showing

What your seeing is a common problem which I encountered on 3 separate displays. I have since diagnosed the problem and am currently life-testing a working solution. The real problem is very poor design of the negative voltage generator circuit for the display contrast. Everything else is working fine except that circuit. I have designed and installed in my treadmill a replacement circuit that is much stronger and am currently testing it. [email protected] for more information

ernesto cuadra

• 12223 Answers
• Posted on Nov 17, 2011

SOURCE: Nordictrack COmmercial 1500 console buttons don't work

http://www.fixya.com/support/r10724803-measure_voltage_in_transforme_fitnes

sincerely. Please keep me in touch.