- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
try to do factory setting default code is 1234 or 0000, or to hard reset try 2945#*# and select factory settings, but before try all this make backup to avoid loose your data of device. This will solve your problem.
"Many drivers for HP products are built into the Mac OS X operating
systems, or are available through Apple Updates. You can use these
drivers by simply connecting the product and adding the product to the
printer list. If you installed the product in this way, you received the
print driver, fax driver (if applicable), and the HP Utility
print management software"
Have you setup the the printer to find for wireless and you also then must setup the "Mac" for wireless.
The printer will then seek wireless products and log in. Its fairly simple, I had a similar problem the mistake was setting up the printer to seek other wireless products
Press the [Menu] button on the Control Panel, until Reports is displayed on the top line of the Display Screen. The Phone Book menu item will be displayed on the bottom line.
Press the right or left arrow button to scroll until the report or list you want to print is displayed on the bottom line.
Phone Book: Phonebook list
Sent Report: Sent fax report
RCV Report: Received fax report
System Data: System data list
Scheduled Jobs: Scheduled job information
MSG Confirm: Message confirmation
Junk Fax List: Junk fax number list
Press [Enter] to print the selected information.
Your machine can print reports containing useful information. The following reports are available:
Phonebook List: This list shows all of the numbers currently stored in the machine's memory as Speed Dial and Group Dial numbers. You can print this phonebook list using the [Phonebook] button.
Sent Fax Repor: This report shows information of the faxes you recently sent.
Received Fax Report: This report shows information of the faxes you recently received.
System Data List: This list shows the status of the user-selectable options. You may print this list to confirm your changes after changing any settings.
Scheduled Job Information: This list shows the document currently stored for Delayed faxes or Toll Save faxes. The list shows the starting time and type of operation.
Message Confirmation: This report shows the fax number, the number of pages, the elapsed time of the job, the communication mode, and the communication results. You can set up your machine to automatically print the message confirmation report after each fax job.
Junk Fax Number List: This list shows up to 10 fax numbers specified as the junk fax numbers by using the Junk Fax Setup menu. When the Junk Fax Barrier feature is turned on, incoming faxes from those numbers will be blocked. This feature recognizes the last 6 digits of the fax number set as a remote fax machine’s ID.
Multi-Communication Report: This report is printed automatically after sending documents from more than one location.
Power Failure Report: This report is printed out automatically when power is restored after a power failure, if any data loss occurs due to the power failure.
NOTE: The lists you have set to automatically print out will not print out when there is no paper loaded or a paper jam has occurred.
Max does recognize receiver over HDMI-CEC. The problem is that DVI output is for video only. Macbook won't (and can't) output audio via DVI. So yamaha receives only video signal via the HDMI connector. You can check that by pressing Option button on yamaha remote and choosing Signal Info - you will see info about video, but no audio signal present.
×