Kenwood KDC-MP205 CD Player Logo

Related Topics:

Question about Kenwood KDC-MP205 CD Player

3 Answers

Demonstration mode won't stop!

I just got this system installed. It's constantly scrolling that demo mode display junk. I've followed the instructions in the manual (several times), and I cannot get it to go away???

Posted by mantisdream on

  • mantisdream Aug 11, 2007

    I tried that, and it still won't work. The instruction manual shows the same image and instructions you posted, but I still have that annoyingly LONG message scrolling across my deck unit. Any other ideas?

×

3 Answers

Greg Cann

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,114 Answers

Did you start from the "Standby" mode?

Posted on Aug 08, 2007

Anonymous

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

The instructions suck! First thing is to press the MENU button
at the top left of the face plate then the SRC button as outlined
in the instructions. This little player really does work well.
Good Luck.

KC

Posted on Dec 24, 2007

Anonymous

Also, you have to be in the menu mode

Posted on Aug 23, 2007

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

It is stuck in demo mode how do I fix the problem

SELECTED PRODUCT: (change your search)
How to disable the demonstration (DEMO) mode.
Article ID: 42707 ' Last Updated: 03/11/2014
Sony® stereo systems will enter the DEMO mode the first time you power on the system or if you do not operate the unit shortly after turning on the power to the system.
To disable the DEMO mode, while the stereo system is powered off, press the DISPLAY button repeatedly until the demonstration display disappears.
NOTES:
  • Depending on your model, some units have a DEMO button that is used to disable the demonstration mode. If your unit has this button, with the power to the system off, press the DEMO button until the display disappears.
  • If applicable to your unit, setting the clock on your stereo system will also disable the DEMO mode.
  • Using the buttons on a supplied remote control will not disable the demonstration mode.
If model-specific information is needed to complete any of these steps, refer to the operating instructions supplied with the product. Manuals, Specifications and Warranty information for your Sony product is available online.
3helpful
4answers

Panasonic inverter nn-cf778s

Demonstration Mode
This is to enable you to experiment setting various
programs. (The letter D will always appear in the display
window. This is to confirm that there is no microwave
power produced and it is safe to use the oven without
any food). To set Demonstration Mode: press micro
power once, then press Stop/Cancel 4 times. To cancel
Demonstration Mode press Micro power once, then
press Stop/Cancel 4 times.
1helpful
1answer

When plug in power cord, set turns on demo mode.No respons when press standby/on butten. By pressing tuner or any function butten, set turns off. What may cause this problem? [email protected] With...

The words "Demo Stop/Clear" are right there on the left-hand control knob.

http://www.p4c.philips.com/files/f/fw-c788_19/fw-c788_19_dfu_eng.pdf

Page 13...

To activate the demonstration

 In Standby mode, press and hold DEMO

STOPçon the system until "DEMO ON" is

displayed.

?žœ The demonstration will begin.

To deactivate the demonstration

 Press and hold DEMO STOP çon the system

until "DEMO OFF" is displayed.

?žœ The system will switch to Standby mode.

Note:

- Even if you remove the AC power cord and

reconnect it to the wall socket, the demonstration
will remain off until you activate it again.

0helpful
1answer

The reciver is stuck in demo mode. Can`t get it out of demo mode.

The demonstration will activate the first time you turn on
the power. When the demonstration starts, the following
message appears in the display:

“NOW DEMONSTRATION MODE IF YOU FINISH DEMONSTRATION PLEASE PRESS POWER KEY WHILE THIS MESSAGE APPEARS IN THE DISPLAY THANK YOU”

To cancel the demonstration
Press the Power 1/0 button to turn the receiver off while the above message is being displayed. The next time you turn the receiver on, the demonstration will not appear.


It's in the manual - page 3.
2helpful
1answer

Sony LBT W5000

According to Page 46 of the LBT-W5000 Operating Instructions:
"The display stars flashing as soon as you plug in the power cord even though you haven't turned on the system (demonstration mode).
Press DISPLAY (for LBT-W5000 / W300 / XB700 / XB500) or DEMO (STANDBY) (for other models) while the system is off. If the system is in the Power Saving mode, press POWER SAVE / DEMO (STANDBY) (for LBT-W5000 / W300 / XB700 / XB500). The demonstration appears automatically the first time you plug in the power cord, or if there is a power outage lasting longer than half a day."
I tested this today, as my LBT-W5000 was in Demonstration Mode. It definitely works. The only catch is (at least on the W5000), and it's a minor one, you have to reset your clock afterwards.
3helpful
1answer

The function DEMO MODE can´t be set off. I want to set any wall paper and the DEMO MODE stay ON.

CLICK HERE for a PDF version of your manual.

To turn OFF DEMO mode - go to page 50 of the manual.... and find the following-

1 Select the Demonstration mode
Push the Control knob to [FM] or [AM].
Select the "DEMO Mode" display.

2 Set the Demonstration mode
Press the Control knob for at least 2 seconds.
Each time the knob is pressed at least 2 seconds,
the Demonstration mode switches as shown
below.

Demo Mode "ON"
Demo Mode "OFF"

Thanks for using FixYa - a FixYa rating is appreciated for answering your FREE question.
1helpful
3answers

Sony demo

Had the same problem. The display of the home cinema system kept showing "sony demo". I went to the system menu and reset all settings to factory!
22helpful
1answer

Philips magnavox fw-c1 3cd, 2 cassette, am/fm stereo

To stop the demonstration mode
• Press and hold stop (on the system
only)
for five seconds when the
system is in demonstration mode.
ª The demonstration will stop.
ª "DEMO OFF" is displayed.
ª The system will switch to standby
mode.
1helpful
1answer

Demo

To stop the demonstration mode
• Press and hold stop (on the system
only)
for five seconds when the
system is in demonstration mode.
ª The demonstration will stop.
ª "DEMO OFF" is displayed.
ª The system will switch to standby
mode.
2helpful
1answer

Demo mode problem

From the user's manual (pg.23): 1. Select the Demonstration Mode. Push the Control knob towards [FM] or [AM]. Select the "DEMO" display. 2. Set the Demonstration Mode. Press the Control knob for at least 2 seconds.
Not finding what you are looking for?

206 views

Ask a Question

Usually answered in minutes!

Top Kenwood Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

5099 Answers

Marvin
Marvin

Level 3 Expert

85242 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Are you a Kenwood Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...