Psp update canclled

First you have to take out the battery and use charger to turned on and when it turn on just put on the battery or take out the battery and wait for minutes then put it on and tur on,if that doesn't work when you turn on just hold R and start or repair it

turn off ur psp,( hold d power button up for 3 sec.) den, hold d "r" button n den turn it on, don't leave d R button until psp starts. dis process will take u to d psp configuration settings.

if you have psp original firmware-OFW 5.03. Here is the procedure and requirements on how to install custom firmware-CFW gen-c and chickhen so that downloaded games can be playable. here is the link http://www.fixya.com/support/r7119752-install_cfw_5_03_gen_c_9_full_psp

go to "network update on your psp

note I did this for PSP 3000 but insted use the PHAT folder and the eggslpoit.tiff also install hellcat's recovery flasher as with PSP 1000/2000 you only need to do it onece or you can use pandora battery if it's on 5.50+
if it's 5.03 or below you are good to go. if it's below 5.03 update to 5.03 (NOT NETWORK UPDATE) http://www.psp-hacks.com/file/1645
download chickHEN: http://downloads.exophase.com/506/chickhen-homebrew-enabler-r2/
download CFW enabler 3.50 (can be higher if you don't want PS1 classics)
http://downloads.exophase.com/506/chickhen-homebrew-enabler-r2/
OPTIONAL (to be safe) download the new PSAR dumper (found on same page as CFW enabler 3.50.)
another optional update (recommended) http://pspnews.co.uk/?p=141

1) after downloading the 3-5 files update to 5.03 (skip steps 1-3 if already on 5.03)
2) extract archives, put EBOOT.PBP(X= drive letter) X/PSP/GAME/UPDATE make folder(s) if needed.
3) plug in PSP must be 75%+ and start the update. do not unplug the PSP and on the 3000 you cannot undo the update.
4) in chickHEN put H.BIN on X/ put the chickHEN photos (slim) X/PICTURE/chickHEN
5) in CFW enabler 3.50+or- put the folder containing EBOOT.PBP in X/PSP/GAME
6)(optional) open chickHEN MOD2 and replace slim.tiff onX/PICTURE/chickHEN (improve stability during the use of some hackedfeatures (making fun of s0ny it makes it load more offton)
7) turn on PSP restore defualt settings (better to hold SQURE TRINGEand START, SELECT) change theam to original green (closet green tobottom)
8) goto the chickHEN photo on the PSP scroll to bottom when the first broken egg loads. if it works good if it doesn't try agin)
8.5) OPTIONAL: if you use PSAR dumper follow the instructions and dump it it is recommended to do this before you do step 9.
9) goto CFW 3.50+ or - and press "flash and start" (recommend plugging it in)
10) it will load into CFW environment and dissaper on full restart/ crash/ freeze
you must do steps 8-10 agin but step 9 will be different and you don't need to flash agin.

troubleshooting: if it doesn't load try a different colour i noticed some PSPswork different with different colours. Example: 3 my PSP 3001s usedgreen one liked light blue. do optional step 6 it increases you'rechance of success (and mocks s0ny's anti-hack "stability during the useof some features have been improved" ********). try setting a fullbackground meaning one that fills the whole screen IE: no black otherthan the picture it's self. (this works better for me)
if you have trouble following the steps email me again. also if youbrick it's you're fault but following my tutorial you have a 99.99%chance of bricking (the most dangerous part is accusaly installing theofficial 5.03 update.)

make your psp on press select button
then change iso mode to sony

how to get internet to my psp

you have a dodgey firmware somone must have got a fw and updated it to their own BUT get a pandora battery and restore it to default

mike @ Psp-repairs08

Hmm i could suggest updating your PSP software cause it may not be able to handle the disc becuase the disc's software might b newer than ur PSP

Lets see, Ive had to deal with a few psp problems so far. The updating is usually on the Sony side, not you. I'd suggest contacting Sony.